Sony KV-27FA210 User Manual

Connect the coaxial cable from your cable service to the IN jack on your cable box.

Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the IN jack 
on your VCR.

Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF 
jack on the TV.

If your VCR is equipped with video outputs, you can get better picture quality by 
connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to 
AUDIO/VIDEO IN on your TV.

❏

For better picture quality, use S VIDEO inserted of the yellow video cable. S VIDEO does 
not provide sound, so you still must connect the audio cables.

❏

Program your Sony remote control to operate your VCR or cable box (see page 5).

❏

To activate your remote, press 

 to operate your VCR or 

 to operate your cable 

box. To do this, first program your remote control, then use the Channel Fix feature to set 
your TV to channel 3 or 4 (see page 29).

❏

Press 

 repeatedly to switch between VCR input (VIDEO input), VHF/UHF (local 

channels or unscrambled), or cable box (cable system or scrambled channels).

1

3

4

5