Sony PCS-G70 User Manual

PCS-G70/G70P

3-863-237-11 (1)

Y:\04C08060_passage\EDIT\09OPE.FM

187

Notes on Secondary Terminals

If there is a terminal that is not adequate for 
the settings set by this system, that terminal 
is called the secondary terminal.
Communication capabilities between the 
secondary terminal and this system are 
shown below.
• Sending/receiving audio
• Receiving video from the secondary 

terminal

• Disables transmission of video to the 

secondary terminal

When a normal phone is connected
The audio mode of the other terminals is not 
affected if a normal phone is connected or 
disconnected any time.

When terminals with “Far End 
Camera Control” set to “On” and 
“Off” are mixed
As the bit rate of video signals differs 
depending on the setting of “Far End 
Camera Control”, the picture is not 
displayed on some terminals.

When a 56K network is mixed among 
the terminals if the conference is held 
via 64K network
The conference automatically changes to 
that via 56 K network. Terminals that cannot 
change to that network are regarded as 
secondary terminals, and the transmission of 
video is not available.

When a terminal with different audio 
mode is connected and its video bit 
rate is different
The conference is conducted in the video 
mode according to the terminal with the 
lowest video bit rate. A terminal that cannot 
fit this rate is regarded as a secondary 
terminal, and the transmission of video is not 
available.

When a terminal whose video mode is 
QCIF standard only
The system does not send video to the QCIF 
terminal.