Sony PCS-G70 User Manual
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\10OTH.FM
masterpage:Left
193
Location and Function of Parts and Controls
Location and
Function of Parts
and Controls
Function of Parts
and Controls
Front/Right side
a
ON LINE indicator
Blinks during dialing or answering and
lights in blue when connection is
completed. It turns off when the system
is disconnected.
lights in blue when connection is
completed. It turns off when the system
is disconnected.
b
POWER/STANDBY indicator
Lights in green when the power switch is
set to on (@). Lights in orange when the
Communication Terminal is set to
standby mode.
set to on (@). Lights in orange when the
Communication Terminal is set to
standby mode.
c
LAN ALERT indicator
Lights in yellow when packet error (loss) or
link error occurs during communication.
link error occurs during communication.
d
Memory Stick slot
Insert a “Memory Stick” (not supplied)
into this slot.
into this slot.
e
Power switch
Turns on/off the Communication
Terminal. The power is on when the
switch is set to the @ side and off when
the switch is set to the a side.
Terminal. The power is on when the
switch is set to the @ side and off when
the switch is set to the a side.
Rear
a
MCU VIDEO OUT (1 - 5)
connectors (mini DIN 4-pin)
connectors (mini DIN 4-pin)
During a multipoint conference, the
video signal from each point is output to
the corresponding connector.
video signal from each point is output to
the corresponding connector.
b
AUDIO OUT (MIXED) jack (phono jack)
Used when recording the sound to
minute a conference. The mixed sounds
of a local and remote parties are output
from this jack.
minute a conference. The mixed sounds
of a local and remote parties are output
from this jack.
c
AUDIO OUT jack (phono jack)
Connect to the audio input of the TV
monitor.
monitor.
d
AUDIO IN AUX jack (phono jack)
Connect to the audio output of the
optional VCR or audio equipment.
optional VCR or audio equipment.
e
AUDIO IN LINE jack (phono jack)
Used when connecting to the optional
CTE-600 Communication Transducer or
an external microphone mixer.
CTE-600 Communication Transducer or
an external microphone mixer.
f
MIC1/MIC2 (PLUG IN POWER)
jacks (minijack)
jacks (minijack)
Connect to the optional PCS-A1 or PCS-
A300 microphone. Power is supplied to
the microphone from the
Communication Terminal.
A300 microphone. Power is supplied to
the microphone from the
Communication Terminal.
Appendix
PCS-PG70/PG70P
Communication Terminal
Communication Terminal
1 2 3
4
5
(MIXED)
AUX
AUX
MONITOR
LINE
AUX CONTROL
MCU VIDEO OUT
VIDEO OUT
AUDIO OUT
AUDIO IN
MIC
MAIN
SUB
EC-MIC
CTRL-S
RGB OUT
DSB
ISDN UNIT
IR OUT
1
2
1
2
3
4
1
2
1
2
1
2
5
DC 19.5V
CAMERA
CAMERA
AUX IN
AUX IN
WHITE
BOARD
100BASE-TX/
10BASE-T
(PLUG IN POWER)