Sony PCS-G70 User Manual

Page of 236
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\10OTH.FM
masterpage:Left
207
Troubleshooting
Troubleshooting
If the Communication Terminal does not function correctly, check the following.
Symptom
Cause
Solution
The power is not 
turned on.
The power switch is not set to on.
Set the power switch to on (
@
The batteries in the Remote 
Commander are low or dead.
Replace the batteries with new ones 
(page 25).
Three indicators on 
the front of the 
Communication 
Terminal blink.
The fan inside the terminal stops.
Turn off the system immediately and 
consult with Sony dealer.
No sound or the 
volume is very low.
The volume of the system is too 
low.
Adjust the sound volume by pressing 
the VOLUME +/– buttons on the 
Remote Commander (page 31).
The volume of the TV monitor is 
too low.
Adjust the volume of the TV monitor.
The microphone on the remote 
party is turned off.
Ask the remote party to turn on the 
microphone.
“Mic Select” is not set properly. 
Set up “Mic Select” properly 
according to the microphone to be 
used (page 50).
Audio input is not selected 
properly.
Set up “Input Select” properly (page 
50).
The microphone or external 
equipment is not connected 
correctly.
Picture is blurred.
Manual focus is selected but picture 
remains blurred.
Adjust the focus (page 95).
When auto focus is selected, the 
background is too bright, contrast is 
too high, or the background or the 
participants’ clothes contain fine 
line patterns.
Select manual focus and adjust 
manually (page 96).