Sony PCS-G70 User Manual
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\03OVR.FM
masterpage:Left
33
Setting Up the System for the First Time — Initial Setup Wizard
Setting Up the
System for the First
Time — Initial Setup
Wizard
System for the First
Time — Initial Setup
Wizard
When you turn on the Communication
Terminal for the first time after installation
and the self-diagnosis is completed, the
setup wizard appears on the monitor screen.
Register your local system data with the
setup wizard using the Remote Commander.
Terminal for the first time after installation
and the self-diagnosis is completed, the
setup wizard appears on the monitor screen.
Register your local system data with the
setup wizard using the Remote Commander.
• You can change the settings made with the
setup wizard later using the Setup menus.
• The setup wizard will also be displayed when
you install the PCSA-B384S, PCSA-B768S,
or PCSA-PRI ISDN Unit to your system
later. Perform the setup again.
or PCSA-PRI ISDN Unit to your system
later. Perform the setup again.
1
Select the language used for the on-
screen menus and messages in the
Language Setup Wizard.
screen menus and messages in the
Language Setup Wizard.
Language: Select one of the following
languages; English, French, German,
Japanese, Spanish, Italian, Simplified
Chinese, or Portuguese.
Japanese, Spanish, Italian, Simplified
Chinese, or Portuguese.
2
Use the
V, v, B or b button on the
Remote Commander to select “Next”,
then press the PUSH ENTER button.
then press the PUSH ENTER button.
The Monitor Setup Wizard appears.
3
Select a monitor from which signals
are output.
are output.
If you select a monitor from “Monitor
Out”, other monitors than that you selected
display no menus.
Out”, other monitors than that you selected
display no menus.
Monitors
Select the number of monitors
connected to the system.
Select the number of monitors
connected to the system.
1: One monitor connected.
2: Two monitors connected.
3: Three monitors connected.
2: Two monitors connected.
3: Three monitors connected.
Connection
Selects the output connector to which
the device to be used is connected.
VIDEO 1: Selects the device connected
Selects the output connector to which
the device to be used is connected.
VIDEO 1: Selects the device connected
to the VIDEO 1 connector.
VIDEO 2: Selects the device connected
to the VIDEO 2 connector.
RGB OUT: Selects the device
connected to the RGB OUT
connector as the main monitor.
connector as the main monitor.
RGB OUT (DSB): Selects the device
connected to the RGB OUT
connector on the Data Solution Box.
connector on the Data Solution Box.
Monitor
Allows you to define the monitor
connected to the corresponding
connector as the main monitor or the sub
monitor.
Main: Defines the monitor as the main
Allows you to define the monitor
connected to the corresponding
connector as the main monitor or the sub
monitor.
Main: Defines the monitor as the main
monitor.
Sub: Defines the monitor as the sub
monitor.
Notes
Language
Language Setup Wizard
English
Next
Cancel
Note
Monitors
Connection
VIDEO1
VIDEO2
RGB OUT
RGB OUT(DSB)
Monitor
Monitor Setup Wizard
Sub
1
Sub
Main
Next
Previous
Cancel