Sony TAV-L1 User Manual

 US

This product contains mercury. Disposal of this product may 
be regulated if sold in the United States. For disposal or 
recycling information, please contact your local authorities 
or the Electronics Industries Alliance (http://www.eiae.org).

This Class B digital apparatus complies with Canadian 
ICES-003.

• Operate the system only on 120 V AC.
• Use the AC power cord specified by Sony and suitable for 

the voltage where you use it.

• The plug is designed, for safety purposes, to fit into the 

wall outlet only one way. If you are unable to insert the 
plug fully into the outlet, contact your dealer.

• If any liquid or solid object should fall inside the cabinet, 

unplug the system immediately and have it checked by 
qualified service personnel before operating it further.

• If you will not be using the system for several days, 

disconnect the power by pulling the plug itself. Never pull 
on the cord.

• For details concerning safety precautions, see “Important 

Safety Instructions” on page 4 and “Safety information” 
on page 7.

• The system should be installed near an easily accessible 

power outlet.

• To prevent internal heat buildup, do not block the 

ventilation openings.

• Do not install the system in a hot or humid place, or in a 

place subject to excessive dust or mechanical vibration.

• Avoid operating the system at temperatures below 5°C 

(41°F).

• If the system is transported directly from a cold to a warm 

location, or if the room temperature changes suddenly, the 
picture may be blurred or show poor color due to moisture 
condensation. In this case, please wait a few hours to let 
the moisture evaporate before turning on the system.

• To obtain the best picture, do not expose the screen to 

direct illumination or direct sunlight. It is recommended to 
use spot lighting directed down from the ceiling or to 
cover the windows that face the screen with opaque 
drapery. It is desirable to install the system in a room 
where the floor and walls are not of a reflective material.

Use the following Sony appliance(s) only with the following 
rack stand.
Use with other rack stand may cause instability and possibly 
result in injury.

SONY APPLIANCE MODEL NO.
TAV-L1

SONY RACK STAND MODEL NO.
SU-32L

Sufficient expertise is required for installing the specified 
product. Be sure to subcontract the installation to Sony 
dealers or licensed contractors and pay adequate attention to 
safety during the installation.

Thank you for choosing this Sony product.
Before operating the system, please read this manual 
thoroughly and retain it for future reference.

• Manufactured under license from Dolby Laboratories. 

“Dolby,” “Pro Logic,” and the double-D symbol are 
trademarks of Dolby Laboratories.

• Manufactured under license from Digital Theater 

Systems, Inc.
“DTS” and “DTS Digital Surround” are registered 
trademarks of Digital Theater Systems, Inc.

•

This system incorporates 
High-Definition Multimedia 

Interface (HDMI™) technology. HDMI, the HDMI logo 
and High-Definition Multimedia Interface are trademarks 
or registered trademarks of HDMI Licensing LLC.