Sony TAV-L1 User Manual
Usin
g Optio
na
l Eq
l Eq
uip
m
m
e
n
t
73
US
To connect
Do this
Personal Computer
G
G
Connect to the VIDEO 6 (PC IN)
with the HD 15-HD 15 cable
(analog RGB, 1.5 m (4 ft 11 in),
supplied) and the audio jack C
on the rear of the system
(page 71).
with the HD 15-HD 15 cable
(analog RGB, 1.5 m (4 ft 11 in),
supplied) and the audio jack C
on the rear of the system
(page 71).
Cable box or
satellite
satellite
receiver
H
Connect only to the VIDEO 5
(HDMI IN) jack. The digital video
and audio signals are input from
the cable box/satellite receiver. If
the cable box/satellite receiver
have a DVI jack and not an HDMI
jack, connect the DVI jack to the
VIDEO 5 (HDMI IN) jack, and
connect the audio jacks to the
VIDEO 5 (HDMI IN) audio jacks.
The digital and analog audio
signals are input from the cable
box/satellite receiver.
(HDMI IN) jack. The digital video
and audio signals are input from
the cable box/satellite receiver. If
the cable box/satellite receiver
have a DVI jack and not an HDMI
jack, connect the DVI jack to the
VIDEO 5 (HDMI IN) jack, and
connect the audio jacks to the
VIDEO 5 (HDMI IN) audio jacks.
The digital and analog audio
signals are input from the cable
box/satellite receiver.
Notes
• If you use only the HDMI
connection, make sure the
connected equipment setting
conforms to PCM output. Refer to
the instruction manual supplied
with the equipment.
connected equipment setting
conforms to PCM output. Refer to
the instruction manual supplied
with the equipment.
• If you use only the HDMI
connection, and the connected
equipment does not conform to
PCM output, connect VIDEO
DIGITAL IN OPT or COAX for
audio signals, then set “OPTICAL
IN” or “COAXIAL IN” to
“VIDEO 5” (page 70).
equipment does not conform to
PCM output, connect VIDEO
DIGITAL IN OPT or COAX for
audio signals, then set “OPTICAL
IN” or “COAXIAL IN” to
“VIDEO 5” (page 70).