Sony STR-DN1040 User Manual
52
US
Listening to FM/AM
radio
radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before
operation, be sure you have connected the
FM and AM antennas (aerials) to the
receiver (page 34).
through the built-in tuner. Before
operation, be sure you have connected the
FM and AM antennas (aerials) to the
receiver (page 34).
1
Select “Listen” from the home
menu, then press
menu, then press
.
2
Select “FM/AM”, then press
.
FM/AM screen
You can select and operate each item on the
screen by pressing
screen by pressing
V/v/B/b and
.
1
Select “Listen” from the home
menu, then press
menu, then press
.
2
Select “FM/AM”, then press
.
The FM/AM screen appears.
3
Select the band indication.
4
Press
V/v repeatedly to select
“FM” or “AM”, then press
.
1
Select the frequency indication on
the FM/AM screen.
the FM/AM screen.
2
Press
V/v.
Press
V to scan from lower to higher
frequency stations, press
v to scan
from higher to lower stations.
The receiver stops scanning whenever
a station is received.
The receiver stops scanning whenever
a station is received.
In case of poor FM stereo
reception
reception
1
Tune in the station you want to listen
to using Auto Tuning, Direct Tuning,
or select the preset station you want
(page 52).
to using Auto Tuning, Direct Tuning,
or select the preset station you want
(page 52).
2
Press OPTIONS.
The options menu appears.
The options menu appears.
You can set FM mode in the options menu
when the frequency indication is selected.
when the frequency indication is selected.
3
Select “STEREO/MONO”, then
press
press
.
4
Select “MONO”, then press
.
Tuner Operations
V/v/B/b,
OPTIONS
Numeric
buttons
buttons
D.TUNING
Toggling between FM
and AM radio
and AM radio
Tuning to a station
automatically (Auto
Tuning)
automatically (Auto
Tuning)
Note