Sony STR-DN1040 User Manual
90
US
Reverting back to the
factory default settings
factory default settings
You can clear all memorized settings and
revert the receiver back to the factory
default settings by performing the
following procedure. This procedure can
also be used to initialize the receiver before
you use it for the first time.
Be sure to use the buttons on the receiver to
perform this operation.
revert the receiver back to the factory
default settings by performing the
following procedure. This procedure can
also be used to initialize the receiver before
you use it for the first time.
Be sure to use the buttons on the receiver to
perform this operation.
1
Press ?/1 to turn off the receiver.
2
Hold down ?/1 for 5 seconds.
The “CLEARING” appears on the
display panel for a while, then changes
to “CLEARED!”.
Changes or adjustments made to the
settings are now reset to the defaults.
display panel for a while, then changes
to “CLEARED!”.
Changes or adjustments made to the
settings are now reset to the defaults.
It takes about a few minutes for the memory to be
cleared completely. Do not turn the receiver off
until “CLEARED!” appears on the display.
cleared completely. Do not turn the receiver off
until “CLEARED!” appears on the display.
Using the Settings menu
You can adjust various settings for
speakers, surround effects, etc. using the
Settings menu.
speakers, surround effects, etc. using the
Settings menu.
1
Press AMP, then press HOME.
The home menu is displayed on the TV
screen.
screen.
Note
?
/1
Adjusting Settings
HOME
RETURN
O
V/v/B/b,
AMP