Sony STR-DN1040 User Manual

Re-runs the Easy Setup to make the basic 
settings. Follow the on-screen instructions 
(page 43).

You can adjust each speaker manually.
You can also adjust the speaker levels after 
the Auto Calibration is completed.

The speaker settings are only for the current 
seating position.

x Auto Calibration

Lets you perform the automatic calibration 
from your seating position automatically.

Follow the instructions on the TV 
screen, then press 

 to select 

“Start”.
The measurement starts in five seconds.

The measurement process will take 
approximately 30 seconds with a test 
tone.
When the measurement ends, a beep 
sounds and the screen switches.

If an error code or warning message appears 
on the screen, see “Message list after Auto 
Calibration measurement” (page 94).

Select the item you want, then press 

.

• Save: Save the measurement results 

and exits the setting process.

• Retry: Performs the Auto Calibration 

again.

• Discard: Exits the setting process 

without saving the measurement 
results.

Save the measurement result.
Select “Save” in step 2.

If you reposition your speaker, we recommend 
that you perform Auto Calibration again to enjoy 
the surround sound.

Network
(page 101)

Internet Setting
Information
PARTY STREAMING
Device Name
External Control
Network Standby

System
(page 102)

Language
Auto Standby
Software Update Notification
Software Version
Network Update

Menu parameters displayed on the TV screen vary, depending on the current settings or the status of the 
selected icon.