Sony PCM-D50 User Manual

Page of 60
21
Recor
ding
Recording
Preparation before recording
When you position the recorder, place it so 
that the microphones point to the sound 
source. For accurate recording of left and 
right sources, place the recorder with its 
front side facing upward (see the illustration 
below). 
The placement of the recorder and the 
direction of the microphone depend on the 
sound source, the microphone, the settings 
of the recorder, etc. It is recommended that 
you try recording with the recorder in various 
positions and settings after referring to the 
illustration below and the characteristics of 
the microphone.
Example: Placement when recording a 
musical performance using the built-in 
microphones
For best results, place the recorder about 2 
to 3 m (6.56 to 9.84 ft) from the sound 
source. Referring to the characteristics of 
the built-in microphones, adjust direction of 
the recorder and the angle of the 
microphones.
Sound source
Approx. 2 to 3 m 
(6.56 to 9.84 ft)
Place the recorder with its 
front side facing upward and 
the built-in microphones 
pointing at the sound source.
Tripod (not supplied)
On the characteristics of the built-in
microphones
The built-in microphones are unidirectional. 
You can change the directions of the 
microphones.
When rotating both capsules of the 
microphones to 90˚ to face inside (X-Y 
position)
The microphone on the right gathers sound 
from the left; the microphone on the left 
records sound from the right.
You can obtain natural and profound stereo 
sound recording. This position is 
recommended for recording close-by sound 
sources such as a solo performance or a 
session of two or three people.
However, if you place the microphones too 
close to the sound source, please note that 
the microphones may catch the sounds 
reversely.
Records 
sound from 
the right.
Records 
sound from 
the left.
Continued on the next page