Sony PCM-D50 User Manual

Page of 60
PCM-D50. US. 3-277-770-12(1)
30
Synchronizing recording with 
playback (Digital Synchronized 
Recording)
Some portable digital devices such as 
portable CD/MD/DAT players do not output 
digital signals while playback is stopped. 
With the signals from those devices, you can 
start recording automatically (Digital 
Synchronized Recording).
1
 
Connect the audio output jacks of the 
external digital equipment to the LINE IN 
(OPT) jack of the recorder using an 
optional optical digital cable.
Set the INPUT switch to the “LINE” 
position.
While the recorder is stopped, press and 
hold the 
/MENU button until the menu 
is displayed.
Press the 
 FF/
 and 
 FR/
 buttons 
to select “SYNC REC” (synchronized 
recording), and press the 
 PLAY/
ENTER button.
The “SYNC REC” display appears.
 Notes
When a different digital signal is input, it is recorded 
as a new track since different signals cannot be 
saved in a track.
During digital recording, the counter display might 
show approximately one second later than the 
actual recording.
During digital recording from a CD/MD/DAT player, 
the recorder may fail in synchronized recording 
mode depending on the type of source data or 
operations attempted. 
We cannot guarantee the operation of all types of  
CD/MD/DAT players. Some external devices you 
use may not operate properly.
When the remaining recordable time is less than 10 
seconds, you may not be able to use synchronized 
recording function.
When you are recording sound as the 99th track in 
a folder, the digital synchronized recording does not 
work and recording continues as the 99th track in 
the folder.
Recording (continued)
Press the 
 FF/
 and 
 FR/
 buttons 
to select “ON,”  and press the 
 PLAY/
ENTER button to fix the setting.
Follow steps 3 and 5 of “Recording using 
the built-in microphones” (pages 23 and 
24) to make the recorder standby, ready 
for recording.
Start playback on the external equipment.
With track information from the 
connected external device, recording 
starts automatically. When tracks of the 
playback signals switch, recording 
continues as a new track.
Using the remote commander for 
recording
You can use the optional remote commander 
(RM-PCM1) to control recording operations.
1
 
Connect the optional remote commander 
to the REMOTE jack of the recorder.
To the 
REMOTE 
jack
Press the appropriate buttons on the 
remote commander to control recorder 
operations such as recording, pausing 
and stopping recording, and dividing a 
track.