Rosewill TV Mount RHTB-13001 Leaflet

User manual

RHTB-13001

TV mounts

Safety measures must be practiced at all times during 

the installation of this product. Use proper safety gear 

and tools for the installation procedure to prevent 

personal injury.

Prior to the installation of this product, the installation 

instructions should be read and completely 

understood. The installation instructions must be read 

to prevent personal injury and property damage. Keep 

these installation instructions in an easily accessible 

location for future reference.

A secure structure must support the weight or load 

of the display, When mounting to a wall that 

contains wooden studs, dead center of the 

wooden stud must be confirmed prior to 

installation.

Do not install on a structure that is prone to 

vibration, movement or chance of impact. 

Failure to do so could result in damage to the 

display and/or damage to the mounting surface.

Do not install near heater, fireplace, direct 

sunlight, air conditioning or any other source of 

direct heat energy. Failure to do so may result in 

damage to the display and could increase the risk 

of fire.

At least two qualified people should perform the 

installation procedure. Injury and/or damage can 

result from dropping or mishandling the display.

Recommended mounting surfaces: wooden 

studs and solid-flat concrete. If the mount is to be 

installed on any surface other than wooden 

studs, use suitable hardware (which is 

commercially available).

The wall structure must be capable of supporting at 

least a maximum weight of37kg (80lbs) for 23”-37” 

televisions. If not, the wall must be reinforced. Proper 

installation procedure by a qualified service 

technician, as outlined in the installation instructions, 

must be adhered to. Failure to do so could result in 

serious personal injury, or even death.

Φ8x40 (x3)

M6x50 (x3)

M6x12 (x4)

M6x30 (x4)

M8x16 (x4)

18X8X20 (x4)

M4x12 (x4)

M4x30 (x4)

Φ15x5.5x1.2(x4)

(x1)