Ronco Ready Grill Instruction Manual

16

•  NOT FOR COMMERCIAL USE.

•  BEFORE FIRST USE: Be sure the Ronco Ready Grill is not plugged 

in. Wash and dry the removable parts in warm soapy water. Never 
immerse the machine or the cord in water. Keep at least 8 inches of 
clearance on all sides and do not place it under a cabinet when in use. 
A little smoke is normal when you first use the machine. 

•  TO DISASSEMBLE

Step 1 - Remove the front 
and back Heat Shields by 
sliding up and at an angle, 
wiggling if necessary. 

Step 2 -  Remove the 
left and right side Basket 
Guides by twisting a quarter 
turn and then lifting up and 
out of the grill. 

Step 3 - Remove Drip Tray 
by sliding it towards you 
and away from the grill.  
Remove the top metal plate 
for thorough cleaning.

•  TO REASSEMBLE, simply reverse the above, ensuring the Basket 

Guides are repositioned first, before inserting the Heat Shields. 

•  With the timer off, unplug your Ronco Ready Grill before cleaning. 

Allow to cool before removing any parts for cleaning. Dispose of fat 
from the Drip Tray by allowing to cool and solidify. Remove the front 
and back reflective heat shields by pulling them up and out of the grill.  

•  Heat Shields and Basket Guides: Wash in hot, soapy water. Nylon 

scouring pads are recommended to remove stubborn buildup. They 
are dishwasher safe. 

•  IMPORTANT: Wash Drip Tray after every use.  Built up grease can 

increase the temperature and result in damage to the Drip Tray base.

•  After several uses there may be a buildup of carbonized grease or fat 

on the Reflective Heat Shield or Side Heat Shields. Wash off excess 
fat as instructed above.  If necessary, use an oven cleaner, but rinse 
thoroughly after use. 

Step 1

Step 2

Step 3