Roland BR-800 User Manual
38
Recording
Here’s how to adjust the volume of the recording on the
track.
track.
1
Lower the [MASTER] fader.
2
Turn the [REC LEVEL] knob to approximately the
center position, and slowly raise the [MASTER]
fader.
3
Use the [REC LEVEL] knob to adjust the recording
level.
Adjust the level so that the INPUT level meter moves
within the range of -12 (between -24 and -6)–0 dB.
within the range of -12 (between -24 and -6)–0 dB.
I
4
Use the [MASTER] fader to adjust the volume
appropriately for monitoring (listening).
* If you use a connection cable that contains a built-in resistor,
the volume on the connected device may be insufficient. In
this case, please use a connection cable that does not contain
a built-in resistor (such as one from the Roland PCS series).
this case, please use a connection cable that does not contain
a built-in resistor (such as one from the Roland PCS series).
1
Press one of the track 1–7/8 [REC] buttons to select the
track(s) on which recording will occur.
The indicators on the buttons show the track status as
follows.
follows.
fig.Rec01.eps
The track(s) that can be selected will depend on the
MODE you selected for INPUT.
MODE you selected for INPUT.
Adjusting the Recording
Level
Level
Try to record at the highest volume possible before
the sound begins to distort. If you want to decrease
the monitoring volume, lower the [MASTER] fader.
the sound begins to distort. If you want to decrease
the monitoring volume, lower the [MASTER] fader.
Selecting the Track(s) for
Recording
Recording
Indicator
Explanation
Unlit
Track that will not be recorded
Lit
Track that will be recorded
Blinking
MODE
Explanation
MONO REC
Mono recording using one track.
You can choose one of the tracks
1–4.
You can also record in stereo by
pressing the track 5/6 [REC] or
track 7/8 [REC] button.
You can choose one of the tracks
1–4.
You can also record in stereo by
pressing the track 5/6 [REC] or
track 7/8 [REC] button.
STEREO REC
Stereo recording using two tracks.
Press the track 1 [REC] or track 2
[REC] button to select the pair of
tracks 1 and 2, or press the track 3
[REC] or track 4 [REC] button to
select the pair of tracks 3 and 4.
Press the track 1 [REC] or track 2
[REC] button to select the pair of
tracks 1 and 2, or press the track 3
[REC] or track 4 [REC] button to
select the pair of tracks 3 and 4.
SIMUL REC
Simultaneous recording using two
tracks.
Press the track 1 [REC] or track 2
[REC] button to select the pair of
tracks 1 and 2, or press the track 3
[REC] or track 4 [REC] button to
select the pair of tracks 3 and 4.
tracks.
Press the track 1 [REC] or track 2
[REC] button to select the pair of
tracks 1 and 2, or press the track 3
[REC] or track 4 [REC] button to
select the pair of tracks 3 and 4.
4TRACK REC
Simultaneous recording using
four tracks.
Press any one of the track 1–4
[REC] buttons to select the four
tracks 1–4, or press the track 5/6
[REC] or track 7/8 [REC] button to
select the four tracks 5–8.
four tracks.
Press any one of the track 1–4
[REC] buttons to select the four
tracks 1–4, or press the track 5/6
[REC] or track 7/8 [REC] button to
select the four tracks 5–8.
BR800_e.book 38 ページ ２０１０年３月２日 火曜日 午後６時４０分