Roland BR-600 User Manual
124
Fixing the Pitch of Vocals (Pitch Correction)
Re
v0.10
v0.10
Let’s now use the BR-600’s pitch correction feature to clean
up some mistakes in a solo vocal part.
up some mistakes in a solo vocal part.
Using this feature, we will be able to correct pitches in real
time and in semitone units.
time and in semitone units.
1
Before using pitch correction, record a solo vocal
track to work with.
2
Press [REC MODE] several times until the BOUNCE
indicator lights up.
The BR-600 will now enter Bounce mode.
3
Confirm that [PAD] is not lit, then press [PITCH
CORRECTION].
This button will light up to indicate that the Pitch
Correction is turned on.
Correction is turned on.
The Pitch Correction patch selection screen will appear.
fig.03-620
4
Press CURSOR [
] [
] to move the cursor to
“LOCAT,” and press [ENTER].
fig.03-630
5
Use TIME/VALUE dial to select the track containing
the solo vocal recording.
The following tracks can be selected at this time:
Tracks 1–8, Tracks 1
2– 7
8
6
Start playback on the BR-600.
Pitches will be corrected in the solo vocal part as it is
played.
Listen to the part to confirm that it is now completely
in tune, and if necessary, adjust the volume of the part
using the corresponding track fader.
played.
Listen to the part to confirm that it is now completely
in tune, and if necessary, adjust the volume of the part
using the corresponding track fader.
Press [STOP] to end playback.
7
Press [EXIT] to return to the patch selection screen.
8
Use [CURSOR] to move the cursor to the patch number
and select a patch using the TIME/VALUE dial.
and select a patch using the TIME/VALUE dial.
9
Press [EXIT].
10
Use [CURSOR] and the TIME/VALUE dial to select
the track or V-track to which the edited result is to be
recorded.
recorded.
The button for the selected track flashes in red,
indicating that the track has been selected as the REC
track.
indicating that the track has been selected as the REC
track.
* The track button alternately lights orange and green when a
track or V-track to which material has already been recorded
is selected as the recording destination.
is selected as the recording destination.
11
Move the faders for all tracks except the track
containing the solo vocal recording all the way down.
Note that this also applies to the Rhythm fader.
12
Press [ZERO] to jump to the start of the song and
then press [REC].
[REC] will turn red and start to flash, indicating that
the BR-600 is now ready for recording.
the BR-600 is now ready for recording.
Using the Pitch Correction
BR600_e2 124 ページ ２００６年４月１７日 月曜日 午前９時３分