Roland BR-600 User Manual

170

With Windows

Re
v0.10

You can take WAV or AIFF files on your computer, such as
files created with audio software applications, and load
them to the BR-600’s tracks.

Connect your computer and the BR-600 with a USB

cable.

Confirm that [PAD] is not lit, and with the recorder

stopped, press [UTILITY].

Press CURSOR [

] [

] to move the cursor to

“USB,” and press [ENTER].

The USB screen appears in the display.

Select “IMPORT” with the TIME/VALUE dial, then

press [ENTER].

fig.05-190

Use CURSOR [

] [

] and the TIME/VALUE dial

to select the track and V-track to be loaded, then press

[ENTER].

When loading to the tracks in mono

fig.05-200

When loading to the tracks in stereo

* Select the track combination 1/2, 3/4, 5/6, or 7/8.

fig.05-210

Use [CURSOR] and the TIME/VALUE dial to specify

the measure or position in the track from which

loading is to start, then press [ENTER].

fig.05-220

The “BOSS_BR-600” (or “Removable disk (*:)”) icon is
added to the computer.

fig.05-060

Loading WAV/AIFF Files in
BR-600 Tracks
(WAV/AIFF Import)

● Wave data in the following formats can be imported.

You cannot import wave data in other formats.

• WAV or AIFF format

• Mono or Stereo

• 8-bit or 16-bit

• Sampling Rate: 44.1 kHz

● Compressed WAV files or AIFF files cannot be

loaded.

● Extremely short waveform data (less than

approximately 1 sec) cannot be loaded.

● The loop point settings within an AIFF file will be

ignored.

● Add the extension “WAV” to imported WAV files

and the extension “AIF” to imported AIFF files.

● If the unit is in the Arrange mode at the time of the

import, it takes place in accord with the timing of the
Arrange mode. On the other hand, if the unit is in the
Pattern mode at the time of the import, it takes place
in accord with the timing of the Pattern mode.

BOSS_BR-600

Removable Disk (*:)

(Ex.)

BR600_e2 170 ページ２００６年４月１７日　月曜日　午前９時３分