Manualsbrain.com
  1. Manuals
  2. Brands
  3. Roland
  4. BR-600
  5. User Manual

Roland BR-600 User Manual

Download
Page of 228
 
179
 
With Macintosh
Re
v0.10
 
Section 5
 
1
 
Connect your computer and the BR-600 with a USB 
cable.
 
2
 
Confirm that [PAD] is not lit, and with the recorder 
stopped, press [UTILITY]. 
 
3
 
Press CURSOR [
] [
] to move the cursor to 
“USB,” and press [ENTER].
 
The USB screen appears in the display.
 
4
 
Select “BACKUP” with the TIME/VALUE dial, then 
press [ENTER].
 
The Idling screen appears in the display.
 
fig.05-530
 
* You cannot carry out the following procedure unless the 
 
The “BOSS_BR-600” icon is added to the computer.
 
fig.05-860
 
5
 
When restoring data backed up on a computer to the 
BR-600, drag the “ROLAND” folder to the “BOSS_BR-
600” icon and drop it there (overwriting it).
 
fig.05-550
 
When you have finished recovering the data, the Idling 
screen returns to the display.
 
6
 
Quit the connection to the computer.
1) Drag the “BOSS_BR-600” icon into the trash.
 
7
 
Press [EXIT].
 
The USB screen returns to the display.
 
* If you press [EXIT] without quitting the connection to the 
computer, the following screens appear. In this case, pressing 
[ENTER] returns the USB screen to the display.
 
fig.05-560
 
8
 
When recover of the data is complete, press [EXIT] to 
return to the Play screen.
 
At this point, you can safely disconnect the USB cable 
from the BR-600 and the computer.
 
Reading backup data back 
into the BR-600 from PC 
(Recover)
When the BR-600 performs Recover, the data on 
memory cards will be overwrited.
BOSS_BR-600
(Ex.)
• During the recovery operation you may encounter 
messages asking whether it is all right to overwrite 
certain files–you should select “YES” in every 
instance. If “NO” is selected even onece, the 
recovery operation will be incomplete, and this 
may prevent the BR-600 from operating correctly.
• When the BR-600 performs Recover, the data on 
memory cards will be overwrited.
BR600_e2 179 ページ ２００６年４月１７日　月曜日　午前９時３分