Roland BR-600 User Manual
198
Initializing the BR-600’s Settings
Re
v0.10
v0.10
Follow the procedure below to initialize the user effect
patches or song effect patches.
patches or song effect patches.
* The same content as that in the Preset patches is copied.
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [
] [
] to move the cursor to
“INI,” and press [ENTER].
fig.06-260
3
Press CURSOR [
] [
] to move the cursor to “U
EFX” (user patch) or “S EFX” (song patch), and press
[ENTER].
The confirmation message “Are you sure?” appears in
the display.
the display.
(Ex.) when you select “U EFX”
fig.06-270
4
To continue the initialization, press [ENTER].
To cancel, press [EXIT](or [UTILITY]).
When [ENTER] is pressed, initialization begins.
After the initialization has been completed, you are
returned to the Play screen.
After the initialization has been completed, you are
returned to the Play screen.
This initializes the Rhythm Arrangements, Patterns, and
Drum Kits.
Drum Kits.
• In Song Arrangement, Step 1 is set to the metronome.
• In song patterns and song drum kits, the step is empty.
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [
] [
] to move the cursor to
“INI,” and press [ENTER].
fig.06-271
3
Press CURSOR [
] [
] to move the cursor to
“RHY,” and press [ENTER].
The confirmation message “Are you sure?” appears in
the display.
the display.
fig.06-280
4
To continue the initialization, press [ENTER].
To cancel, press [EXIT] (or [UTILITY]).
When [ENTER] is pressed, initialization begins.
After the initialization has been completed, you are
returned to the Play screen.
After the initialization has been completed, you are
returned to the Play screen.
Initializing the Effect Settings
Initializing the Rhythm
Arrangements/Patterns/Drum Kits
Arrangements/Patterns/Drum Kits
BR600_e2 198 ページ ２００６年４月１７日 月曜日 午前９時３分