Roland BR-600 User Manual
Re
v0.10
v0.10
67
Section 1
L
oading Songs Created with the BR-900CD/BR-864/BR-532
You can load songs created with the BR-900CD, BR-864, or
BR-532 into the BR-600 via memory cards.
BR-532 into the BR-600 via memory cards.
First, save the song data created with the BR-900CD or BR-
864 to a memory card, then insert the memory card into the
BR-600.
864 to a memory card, then insert the memory card into the
BR-600.
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [
] [
] to move the cursor to
“SEL,” and press [ENTER].
The Song Select screen is appeared.
fig.01-330
3
Rotate the TIME/VALUE dial to select the song to be
loaded.
4
Press [ENTER].
The song data is loaded.
The song protect icon (
) is indicated for the BR-
900CD/BR-864 songs.
Loading Songs Created with
the BR-900CD/BR-864
the BR-900CD/BR-864
• Once you record, edit, or set parameters for
imported BR-864 song data, that particular song
data can no longer be used by the BR-864.
(The data can be used with the BR-900CD.)
To protect against accidental recording or editing,
song protect (p. 88) is automatically switched on
for imported BR-864 song data.
data can no longer be used by the BR-864.
(The data can be used with the BR-900CD.)
To protect against accidental recording or editing,
song protect (p. 88) is automatically switched on
for imported BR-864 song data.
If you can accept the fact that you will no longer
be able to use the song data with the BR-864, you
can switch song protect off, then carry out
recording or editing.
be able to use the song data with the BR-864, you
can switch song protect off, then carry out
recording or editing.
When you turn off song protect, “Overwrite OK?”
appears in the display; press [ENTER] (YES). Song
protect is switched off, and the data is
simultaneously converted to BR-600 format.
appears in the display; press [ENTER] (YES). Song
protect is switched off, and the data is
simultaneously converted to BR-600 format.
• When the “Guitar Synth” algorithm is used with
the BR-864, an asterisk (“*”) is added before the
patch name, and the patch's algorithm and
parameter values will be the same as those in
“P01: JC Clean” in the GUITAR bank.
patch name, and the patch's algorithm and
parameter values will be the same as those in
“P01: JC Clean” in the GUITAR bank.
In addition, if “Harmonist” is used for the effect, the
“Flanger” effect is substituted for it. The patch
name is not changed.
“Flanger” effect is substituted for it. The patch
name is not changed.
BR600_e2 67 ページ ２００６年４月１７日 月曜日 午前９時３分