Roland BR-600 User Manual
74
Search for the Music’s Start and End (Scrub/Preview)
Re
v0.10
v0.10
Besides switching the scrub point in the Play screen (p. 73),
you can also use the following method to switch the scrub
point.
you can also use the following method to switch the scrub
point.
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [
] [
] to move the cursor to
“SCR,” and press [ENTER].
fig.02-040
3
Press CURSOR [
] [
] to select “FROM/TO,” and
turn the TIME/VALUE dial to change scrub points.
fig.02-050
TO :
Scrubs to your current position.
FROM :
Scrubs from your current position.
4
After completing the setting, press [UTILITY] (or
press [EXIT] repeatedly) to return to the Play screen.
Besides using [PLAY] for the Preview function (p. 73), you
can also set the unit so that [REW] and [FF] can be used
with the Preview function.
can also set the unit so that [REW] and [FF] can be used
with the Preview function.
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [
] [
] to move the cursor to
“SCR,” and press [ENTER].
fig.02-060
3
Press CURSOR [
] to select “Preview SW,” and
turn the TIME/VALUE dial to set “ON.”
fig.02-070
This enables use of the Preview function.
4
Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.
Changing the Scrub Points
Enabling Use of the Preview
Function with [REW] and [FF]
Function with [REW] and [FF]
You can temporarily switch to Preview during scrub
with the following operations.
with the following operations.
Press [REW] : PREVIEW TO
Press [FF] :
PREVIEW FROM
BR600_e2 74 ページ ２００６年４月１７日 月曜日 午前９時３分