Rane Microphone MS 1S Data Sheet

Data Sheet-1

MICROPHONE STAGE

The Rane MS 1S Mic Stage preamplifier 

provides the answer when you need just 

one microphone input in an otherwise 

line-level world. Give us a call to go from 

either a dynamic, condenser or electret 

microphone to a line-level input with a 

minimum of noise, distortion, cost and 

hassle.

The MS 1S provides 48 V switchable 

Phantom Power with an indicator LED, 

continuous rotary Gain trim between 15 

dB and 60 dB, Signal/Overload LED, and 

XLR balanced Input & Output connec-

tors. A Polarity switch and high-current 

cross-coupled output line driver round out 

the features.

The MS 1S utilizes one of the finest 

ultra low noise amplifier designs available. 

Featuring a true differential input with 

high common-mode rejection, use of the 

MS 1S guarantees performance usually 

found only in mixing consoles costing 

thousands of times as much. Of course, 

for all of that extra money you receive a 

proportional increase in KPSI (knobs per 

square inch).

The MS 1S replaces the MS 1B Mic 

Stage with a new internal universal power 

supply. The width increases by one inch, 

all other features are the same.

•   -127 dB Equivalent Input Noise
•   Gain Control
•   Signal / Overload Indicator
•   Polarity Switch

•   Switchable 48 V Phantom Power 
•   True Differential Input
•   Cross-coupled Line Driver
•   Internal 100-240 VAC Power Supply