Realtree Two-Way Radio RT210 User Manual

Use scanning to monitor channels and codes for transmissions or to find someone in
your group who has accidentally changed channels.

To start scanning, briefly press and release 

“ MON”

. The scan indicator displays    .

When the radio detects channel activity, it stops scanning and you can hear the 
transmission. To respond to the transmission, press     within 5 seconds.

Note: If your radio's Interference Eliminator Code is set to 

while scanning, the radio

checks for activity on each channel regardless of the code used on the channel. 
If your radio's Interference Eliminator Code is set to 

, the radio checks for

activity only on channels using codes 

and 

If the radio stops scanning on a channel you do not want to listen to, briefly press and
release 

or 

to resume scanning for the next active channel.

To remove a channel so the radio does not stop on it while scanning, press and hold or

for      at least 3 seconds, then release. This temporarily removes the channel from the

scan list.

To restore the channel, turn the radio off and then back on.

Note: You cannot remove the channel your radio was set to when you started the scan

(called your home channel).

18

Special Features

Special Features

+

l

+

l

ignores channels using code     .

 Realtree 10-01-04.qxd  10/1/04  12:14 PM  Page 20