Raritan Computer Home Theater Server P2-USTIP1 User Manual
22
USTIP
U
SER
G
UIDE
Time and Date
Select [T] Time and Date on the Configuration Menu to view and adjust current date and time
on the USTIP unit. Once saved, Time and Date changes will not take effect until USTIP is
restarted.
on the USTIP unit. Once saved, Time and Date changes will not take effect until USTIP is
restarted.
Figure 18 Time and Date Screen
• New Date / New Time: To manually input changes to current date and time values.
• Adjust for daylight savings time: Toggle between YES and NO to reflect whether your
• Adjust for daylight savings time: Toggle between YES and NO to reflect whether your
country or state follows the daylight savings time procedure.
• Get Time From SNTP Server: Indicates whether USTIP time/date should be automatically
synchronized with the time/date of an external SNTP server.
− Primary Server IP Address: IP address of first SNTP server to attempt time
− Primary Server IP Address: IP address of first SNTP server to attempt time
synchronization.
− Secondary Server IP Address: IP address of second SNTP server to query, if primary
server is unavailable.
− User standard UDP port 123: Allows user to modify UDP port used for SNTP time
synchronization. Consult your SNTP server administrator to determine if this value
should be adjusted.
should be adjusted.
• Time Zone: Select the time zone in which your USTIP unit is physically located.
Press CTRL+S to save changes or Esc to cancel changes, and return to the Configuration Menu.
Saved Radius Configuration changes will not take effect until USTIP is restarted.
Press CTRL+S to save changes or Esc to cancel changes, and return to the Configuration Menu.
Saved Radius Configuration changes will not take effect until USTIP is restarted.