Yamakawa M2090 M2095 User Manual
Index
Trouble Shooting
Installation
Din-Front Mounting (Method A)
2
Din-Rear Mounting (Method B)
3
Using the Detachable Panel Unit
4
Operation
Operating Controls
5
General Operation
6
Radio Operation
6
RDS (Radio Data System) Operation
7
CD and CDC Operation
9
MP3 Operation
10
Wiring Connection and Specifications
11
Trouble Shooting
12
Service / Warranty
12
Before going through the check list, check wiring connection. If any of the problem persist after check list had been made,
consult your nearest service dealer.
consult your nearest service dealer.
If the power supply is properly
connected to the car accessory
terminal, switch the ignition key to
"ACC".
connected to the car accessory
terminal, switch the ignition key to
"ACC".
Replace the fuse
Remove the disc in the player, then put
a new one.
a new one.
Insert the compact disc with the label
facing upward.
facing upward.
Clean the disc or try to play a new one.
Cool off or until the amblent
temperature return to normal.
temperature return to normal.
Leave the player to off for an hour or
so, then try again.
so, then try again.
Adjust volume to a desired level.
Check wiring connection.
Press the RESET button.
Front panel is not properly fixed into its
place.
Front panel is not properly fixed into its
place.
Adjust the installation angle to less
than 30 degrees.
than 30 degrees.
Clean the compact disc. Then try to
play a new one.
play a new one.
Insert the antenna cable firmly.
Select a station manually.
The car ignition is not on.
The fuse is blown.
Presence of CD disc inside the player.
Inserting the disc in reverse direction.
Compact disc is extremely dirty or
detective disc.
detective disc.
Temperature inside the car is too high.
Condensation.
Volume is in minimum.
Wiring is not properly connected.
The built-in microcomputer is not
operating properly due to noise.
operating properly due to noise.
The installation angle is not more than
30degrees.
30degrees.
The disc is extremely dirty or defective
disc.
disc.
The antenna cable is not connected.
The signals are too weak.
No power
Disc cannot be loaded
or ejected.
or ejected.
No sound.
The operation keys do
not work.
not work.
Sound skips.
The radio does not
work. The radio
station automatic
selection does not
work.
work. The radio
station automatic
selection does not
work.
Symptom
Cause Solution
Service / Warranty
Under www.yamakawa.de you can find service and warranty information for this
product in the service/support section.
product in the service/support section.
If necessary you can also use our hotline (phone and email) for further support. You
can find the hotline numbers in the service/support section of www.yamakawa.de
can find the hotline numbers in the service/support section of www.yamakawa.de