Yamaha DA824 Data Sheet
480
366.8
88 (2U)
430
ANALOG OUTPUT SPECIFICATIONS
CONTROL I/O SPECIFICATIONS
Output
Terminals GAIN SW
Actual Load
Impedance
For use with
nominal
Output level
Connector
Nominal
Max. before clip
OUTPUT 1-8
+24dB
75Ω Lines
600Ω Lines
+10dBu
+24dBu
XLR3-32 type*
TRS Phone Jack*
+18dB
+4dBu
+18dBu
+15dB
+1dBu
+15dBu
+4dBV
-10dBV
+4dBV
Output terminals
Format
Level
Connector
COM
-
RS232C
9-pin D-sub (Male)
WORD CLOCK
IN
-
TTL, 75Ω (ON/OFF)
BNC Connector
THRU
-
TTL, 75Ω
BNC Connector
SLOT
Mini-YGDAI
-
-
DA824
DA824
DA Converter
Reliable, high-quality 24 bit/48 kHz conversion of 8-channel digital audio
input into analog output.
input into analog output.
•
High quality 24-bit digital-to-analog converters.
•
Balanced XLR and 1/4" phone jack output connectors.
•
Maximum +4, +15, +18, or +24 dBm output level individually selectable for each channel.
•
Expansion slot supports optional mini-YGDAI cards for AES/EBU, ADAT and TASCAM digital formta.
•
Word clock input and thru connectors.
•
Signal, nominal, and peak LED indicators.
GENERAL SPECIFICATIONS
Sampling frequency rate
External: MY8-AE, MY8-TD: 39.69kHz (Min) to 50.88kHz (Max)
MY8-AT: 41.013kHz (Min) to 50.88kHz (Max)
Signal Delay
0.57ms Typ. DIGITAL INPUT to ANALOG OUTPUT (@fs=48kHz)
Total harmonic distortion*
1
Less than 0.1%, 20Hz to 20kHz @+4dB into 600W
Frequency response
20Hz - 20kHz, +1, -3dB, @+4dBu into 600W
Dynamic range
110B typ. AD+DA (with AD824)
Hum & noise level*
2
(20Hz to 20kHz), Rs=150Ω
-62dBu residual noise, Gain = -62dB
-84dBu residual noise, Gain = +10dB
-84dBu residual noise, Gain = +10dB
Crosstalk (@1kHz)
-80dB input to output
MY card slot
1
DA converter
24bit
Output terminal
XLR type, TRS phone
Word clock
IN, THRU
Power requirements
Japan:
AC100V, 50/60Hz
North America: AC120V, 60Hz
Other Areas: AC230V, 50Hz
Other Areas: AC230V, 50Hz
Power consumption
40W
Dimensions (W x H x D)
480 x 88 x 366.8mm (18.9" x 3.84" x 14.44"), 2U
Weight
7.5kg (16.53lbs)
*1 Total harmonic distortion is measured with a 18dB/Oct filter @80kHz.
*2 Hum & noise level is measured with a 6dB/oct filter @12.7kHz; equivalent to 20kHz filter with
infinite dB/Oct attenuation.
DIMENSIONS
unit : mm
Rear Panel