Yamaha Projector Accessories YSP-40D User Manual

The unit begins scanning the selected band(s) for 
DAB ensembles.
• During the scan, “Scanning” appears in the front 

panel display.

• When the scan has been completed, “FINISH” 

appears in the front panel display, followed by the 
number of a receivable DAB service. 
“FINISH [###]” is displayed for three seconds.

Scanning xx%

FINISH [015]

(Example: if 15 services were found.)

After three seconds, this unit returns to the DAB 
tuning mode automatically.

If the INIT SCAN operation was not successful, “Not 
Available” appears in the front panel display.

FINISH [000]

Not Available

y

See the DAB section in “Troubleshooting” for further 
details or proper remedies (see page 116).

If there are no preset DAB services, “Initiate Scan” or 
“Not Available” appears in the front panel display.In this 
time, press 

 / 

 to start INIT SCAN automatically.

TUNE AID displays the strength of the DAB signal being 
received by this unit in the front panel display. Use TUNE 
AID to adjust the positioning of the indoor DAB antenna 
and this unit and discover which setup has the best 
reception state. It is recommended that you use TUNE 
AID when setting up this unit in order to maximize DAB 
reception ability.

“INIT SCAN” appears in the front panel display.

“TUNE AID” appears in the front panel display.

The signal strength level of the selected channel 
appears in the front panel display. The signal strength 
ranges from 00 (none) to 100 (best).

The signal strength level of the new channel appears in 
the front panel display. For a list of DAB frequencies, 
see “DAB frequency table” on page 119.

The unit returns to the TUNE AID menu display.

BBC Radio 4

INIT SCAN

TUNE AID

11B / LEVEL: 80

11C / LEVEL: 40

TUNE AID