Yamaha DVD Player DVD-S2700 User Manual

Surround L/R
Set the distance from your listening position to the 
surround speakers. We recommend to place the surround 
left speaker and right speaker at the same distance from 
the listening position.

Control range: 1ft to 40ft (0.3m to 12.0m)

Control step: 1ft (0.3m)

For the [Surround L/R] setting, you cannot specify the distance 
beyond the [Front L/R] setting or below the [Front L/R] setting 
minus 15ft (4.5m).

Initialize
You can reset [Distance] settings to the initial factory 
settings.

Select [Initialize] under [Distance] in 
[SPEAKER] menu.

Press

.

➜ The confirmation screen appears.

Select [Yes] to reset the setting, and then press 
ENTER.

➜ [Distance] settings are reset to the initial factory 

settings.

You can set the volume levels for individual speakers.

•

Select [Level] in [SPEAKER] menu.

Front L, Center, Front R, Surround L, Surround R, 
Subwoofer
Set the volume levels for front L/R speakers, center 
speaker, surround L/R speakers or subwoofer.

Control range: 0dB to –12dB

Control step: 1dB

Test Tone
A test tone can be output to help you judge the volume 
level of each speaker.

Select [Test Tone] under [Level] in [SPEAKER] 
menu.

Press

 to select [Off], [Manual] or [Auto].

Off
Select this to output no test tone.

Manual
Select this to output the test tone manually.

Auto
Select this to output the test tone from each speaker 
automatically.

For [Auto], press ENTER to output the test tone. 
For [Manual], press 

/ 

 to select each 

speaker, and then press 

 to output the test 

tone.

Initialize
You can reset [Level] settings to the initial factory settings.

Select [Initialize] under [Level] in [SPEAKER] 
menu.

Press

.

➜ The confirmation screen appears.

Select [Yes] to reset the setting, and then press 
ENTER.

➜ [Level] settings are reset to the initial factory 

settings.

You can select speaker sizes and on/off statuses for SA-
CD discs.

•

Select [SA-CD Config] in [SPEAKER] menu.

Config 1, Config 2, Config 3
Select speaker sizes and on/off statuses from the following 
three settings.

You can select a cut-off (cross-over) frequency for all low-
frequency signals. All frequencies below the selected 
frequency are sent to the subwoofer.

•

Select [CUT-OFF Frequency] in [SPEAKER] 
menu.

60, 80, 100, 120 (Hz)
Select the cut-off frequency.

Front L/R

Large

Small

Large

Center

Large

Small

Small

Surround L/R

Large

Small

Small

Subwoofer

On

On

Off