Yamaha DVD-S1800 Owner's Manual
33
En
SETUP MENU
English
Initialize
You can reset [Distance] settings to the initial factory
settings.
You can reset [Distance] settings to the initial factory
settings.
1
Select [Initialize] under [Distance] in
[SPEAKER] menu.
[SPEAKER] menu.
2
Press
.
➜ The confirmation screen appears.
3
Select [Yes] to reset the setting, and then press
ENTER.
ENTER.
➜ [Distance] settings are reset to the initial factory
settings.
Setting speaker levels
You can set the volume levels for individual speakers.
•
Select [Level] in [SPEAKER] menu.
Front L, Center, Front R, Surround L, Surround R,
Subwoofer
Set the volume levels for front L/R speakers, center
speaker, surround L/R speakers or subwoofer.
Subwoofer
Set the volume levels for front L/R speakers, center
speaker, surround L/R speakers or subwoofer.
Control range: 0dB to –12dB
Control step: 1dB
Test Tone
A test tone can be output to help you judge the volume
level of each speaker.
A test tone can be output to help you judge the volume
level of each speaker.
1
Select [Test Tone] under [Level] in [SPEAKER]
menu.
menu.
2
Press
/
to select [Off], [Manual] or [Auto].
Off
Select this to output no test tone.
Select this to output no test tone.
Manual
Select this to output the test tone manually.
Select this to output the test tone manually.
Auto
Select this to output the test tone from each speaker
automatically.
Select this to output the test tone from each speaker
automatically.
3
For [Auto], press
/
to select [Yes], and then
press ENTER to output the test tone. For
[Manual], press
[Manual], press
/
to select each speaker,
and then press
ENTER
to output the test tone.
• The test tone is not output from a center speaker, surround
speakers, and a subwoofer when the [Analog Output] setting is
set to [Stereo] (see “Setting the analog output” on page 31).
set to [Stereo] (see “Setting the analog output” on page 31).
• These settings are only effective for analog output.
Initialize
You can reset [Level] settings to the initial factory settings.
You can reset [Level] settings to the initial factory settings.
1
Select [Initialize] under [Level] in [SPEAKER]
menu.
menu.
2
Press
.
➜ The confirmation screen appears.
3
Select [Yes] to reset the setting, and then press
ENTER.
ENTER.
➜ [Level] settings are reset to the initial factory
settings.
Setting the SA-CD configuration
You can select speaker sizes and on/off statuses for
SA-CD discs. You can also select a cut-off (cross-over)
frequency for all low-frequency signals. All frequencies
below the selected frequency are sent to the subwoofer.
SA-CD discs. You can also select a cut-off (cross-over)
frequency for all low-frequency signals. All frequencies
below the selected frequency are sent to the subwoofer.
•
Select [SA-CD] in [SPEAKER] menu.
SA-CD Config
Select speaker sizes and on/off statuses from the following
three settings.
Select speaker sizes and on/off statuses from the following
three settings.
CUT-OFF Frequency
Select a cut-off (cross-over) frequency for all low-
frequency signals. All frequencies below the selected
frequency are sent to the subwoofer.
Select a cut-off (cross-over) frequency for all low-
frequency signals. All frequencies below the selected
frequency are sent to the subwoofer.
Control range: 60, 80, 100, 120 (Hz)
Notes
Speaker
Size or on/off
Config 1
Config 2
Config 3
Front L/R
Large
Small
Large
Center
Large
Small
Small
Surround L/R
Large
Small
Small
Subwoofer
On
On
Off
01EN_DVD-S1800_U.book Page 33 Thursday, July 19, 2007 1:28 PM