Yamaha pdm-4210 User Manual
AV1
AV2
RGB 1
RGB 2
AV3
MUTE
VOL
VOL
AV4
AUTO
PinP
OK
SIZE
RECALL
MENU
ID
ID SET
10
Remote control
ID SET button
17
POWER OFF button
14
POWER ON button
14
POWER ON/OFF button
14
MENU button
17
MUTE button
15
VOLUME UP/DOWN buttons
15
RETURN button
17
RECALL button
16
AUTO button
17
PinP button
35
ID button
17
SELECT/ADJUST buttons
17
OK button
17
Loading Batteries
1. Open the battery cover.
• Slide back and remove the battery
cover in the direction of the arrow.
2. Load the batteries.
• Load the two Size AA batteries included, matching polarity
markings on the batteries to those on
the case.
the case.
3. Close the battery cover.
• Replace the battery cover in the
direction of the arrow and snap it back
into place.
into place.
Use the remote control within 5 m from the front of the unit, within a
30 degree arc either side of the remote control sensor.
30 degree arc either side of the remote control sensor.
With in 30
degrees
degrees
About 5m
About 3m
With in 30
degrees
degrees
About 3m
AV1
AV2
RGB 1
RGB 2
AV3
MUTE
VOL
VOL
AV4
AUTO
PinP
OK
SIZE
RECALL
MENU
ID
ID SET
CAUTION
• Do not use new and old batteries together. The batteries could
explode or leak, resulting in fires, physical injury, or stains.
• When loading batteries, observe their correct polarities as
marked on the product. If loaded in the wrong direction, the
batteries could explode or leak, resulting in fires, physical injury,
or stains.
batteries could explode or leak, resulting in fires, physical injury,
or stains.
ATTENTION
• Do not drop or exert undue force on the remote control.
• To avoid possible failures. Do not splash the remote control with
• To avoid possible failures. Do not splash the remote control with
water or put it on a wet object.
• If you do not intend to use the remote control for an extended
period of time, remove the batteries from it.
• If the remote control begins to lack responsiveness, replace the
period of time, remove the batteries from it.
• If the remote control begins to lack responsiveness, replace the
batteries.
• Strong light such as direct sunlight impinging on the
photoreceptor of the remote control can cause operational
failure. Position this unit to avoid direct contact with such light.
failure. Position this unit to avoid direct contact with such light.
Handling the Remote Control
COMPONENT NAMES (continued)
SIZE button
16
RGB/VIDEO buttons
15
012_PDM-4210_U_E 2003.12.23 17:51 ページ 10 (ブラック 版)