Yamaha pdm-4210 User Manual
32
Optional Video Unit Function
Additional functions when the optional video unit is installed are as follows: ( )
Monitor rear panel
Speaker (R)
Speaker (L)
Power
cord
cord
(1) Make sure that the power switch of the monitor is turned off.
(2) Make sure that the power switch of the imaging device is turned off.
(3) Use a commercially available cable and connector to connect the signal input terminal on the rear panel of this
(3) Use a commercially available cable and connector to connect the signal input terminal on the rear panel of this
device and the signal output terminal of the imaging device.
INSTALLATION INSTRUCTIONS
Connecting to a Video Imaging Device
• If video equipment with an S video output terminal is used,
connection with S video cable is recommended to provide finer
video quality. (If the S video input terminal and the video input
terminal of AV3 connect to the monitor at the same time, S video
input would govern.)
video quality. (If the S video input terminal and the video input
terminal of AV3 connect to the monitor at the same time, S video
input would govern.)
• If the OUTPUT (MONITOR) terminal is connected to an external
monitor with a 75 Ohm terminal, it is possible to view the same
image as on the main unit. But it is possible to monitor only the
composite video signal from AV1, AV2, AV3 or AV4 input that is
displayed on the screen at the time.
image as on the main unit. But it is possible to monitor only the
composite video signal from AV1, AV2, AV3 or AV4 input that is
displayed on the screen at the time.
• If the adaptor (included) is applied to AV4 input as shown in the
drawing, it is impossible to receive RGB signal.
DVI-STB and RGB component setup
To component video
equipment.
equipment.
Please use connection
cable suitable for the terminal
form of video equipment.
cable suitable for the terminal
form of video equipment.
32
43
∼
Applicable video signals for each input terminal (See PRODUCT SPECIFICATIONS for details. )
Terminal
RCA/SCART
DVI
D-sub
Remarks
Signal
CVBS
S-video
Component
RGB
PC
STB
RGB
Component
AV1
○
○
AV2
○
○
○
Refer to Setup Menu.
AV3
○
○
AV4
○
○
○
Refer to Setup Menu.
RGB1
○
○
Refer to Setup Menu.
RGB2
○
○
Refer to Setup Menu.
(
○ : Available)
41
39
39
40
40
Use if the
video
equipment
has an
S video
input terminal
video
equipment
has an
S video
input terminal
T
o
S video output
terminal
T
o
audio output
terminals
T
o
audio output
terminals
T
o
component
output terminals
T
o
component
output terminals
T
o
component
input terminals
T
o
component
input terminals
T
o
composite
input terminal
T
o
audio output
terminals
T
o
audio input
terminals
20
18
16
14
12
10
8
6
4
2
21 19
17
15
13
11
9
7
5
3
1
VCR
VCR
DVD player
Set-Top Box
Video disc player
Adaptor
T
o
composite
output terminal
S-video/Composite video
Do not connect both
plugs at the same time.
Use either of them.
plugs at the same time.
Use either of them.
[An example of connecting video imaging devices]
015_PDM-4210_U_E 2003.12.24 18:37 ページ 32 (ブラック 版)