Yamaha pdm-4210 User Manual

  Picture
  Audio
  Timer
  Function
  Setup
  Language
     Select
   OK  Set

Setup
  System 

 

System 2

  Color System
  Video Input
  Audio Input
  Scart Output 

Monitor 

  RGB1 

 

DVI-STB

  RGB2 

 

Component

   

HDTV 

 

     Select            Set              Return

OK

Setup
  System 

 

System 2

  Color System
  Video Input
  Audio Input
  Scart Output 

Monitor 

  RGB1 

 

DVI-STB

  RGB2 

 

Component

   

HDTV 

 

     Select            Set              Return

OK

OK

    MENU

OK

Setup
  Color System

   

AV1 

Auto

   

AV2 

NTSC-M

   

AV3 

PAL-M

   

AV4 

PAL-N 

     Select            Return          Exit

Setup
  System 

 

System 2

  Color System
  Video Input
  Audio Input
  Scart Output 

Monitor 

  RGB1 

 

DVI-STB

  RGB2 

 

Component

   

HDTV 

 

     Select            Set              Return

OK

OK

Setup
  Video Input

   

AV1 

Auto

   

AV2 

Composite/Component

   

AV3 

Auto

   

AV4 

S.Video 

     Select            Return          Exit

OK

Setup
  Audio Input
    AV1 

Stereo

    AV2 

L/Mono

    AV3 

Stereo

    AV4 

L/Mono 

     Select            Return          Exit

System

System1         System2

Do not change the original setting.
(System1 : Europe/Asia, System2 : North America)

Color System

AV1

Auto         NTSC-M

PAL-N         PAL-M

This should correspond to the color system of the signal from the
equipment that is connected to the AV1 video input terminal.
• Normally, set this to Auto. The system of the input signal will be

automatically recognized.

• If the input signal contains a lot of noise or has a low level at Auto and

the operation is erratic, set this to match the input signal.

• When the component signal is received, this setting is not available

(grayed out).

AV2

(Same to AV1)

AV3

AV4

Video Input

AV1

Auto         HDTV         SDTV/DVD

This should correspond to the signal mode of the signal from the
equipment that is connected to AV1 video input terminal.
• Normally, set this to Auto. The signal mode of the input signal will be

automatically recognized.

• If the input signal contains a lot of noise or has a low level at Auto and

operation is erratic, set this to match the input signal.

AV2 (1st step)

RGB         Composite/Component

This should correspond to the signal mode of the signal from the
equipment that is connected to AV2 video input terminal.

AV2 (2nd step)

Auto         HDTV         SDTV/DVD

This step should be set only when [Composite/Component] is selected on
the 1st step. The procedure is same as for AV1.

AV4

S.Video         Composite

• If the signal from the equipment that is connected to the AV4 Scart input

terminal is S.Video or Composite, set this to correspond to that signal.

• If the signal is RGB, it will be automatically recognized and this setting

will have no effect.

▲

▲

015_PDM-4210_U_E    2003.12.24  18:37    ページ  39        (ブラック 版)