Yamaha DRX-2 User Manual
Installing your DVD recorder
22
English
During installation, all available TV channels are searched for and stored. If the channel
assignments of your cable or satellite TV provider change or if you are reinstalling the
DVD recorder, e.g. after moving house, you can start this procedure again. This will
replace the stored TV channels with the new ones.
assignments of your cable or satellite TV provider change or if you are reinstalling the
DVD recorder, e.g. after moving house, you can start this procedure again. This will
replace the stored TV channels with the new ones.
1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
recorder.
2
Switch on the DVD recorder using B/I.
3
Press SYSTEM-MENU on the remote control. The menu bar appears.
4
Select “
” symbol with t or u.
5
Select “Installation” using w or v and confirm with u.
6
Select “Auto Ch. Programming” using w or v.
7
Press u.
8
The automatic TV channel search starts. This allows the DVD recorder to save all
available TV channels. This procedure may take several minutes.
available TV channels. This procedure may take several minutes.
9
When all the TV channels have been found, “Auto ch. search complete” will
appear on the TV screen.
appear on the TV screen.
0
To end, press SYSTEM-MENU.
You can read about how to search for a TV channel manually in “Adding and clearing TV
channels manually”.
channels manually”.
Automatic TV channel search
Question
Cannot select “
”?
You need to stop the disc to select “
’.
Problem
✘ Very few TV channels were found
✓ During “Automatic channel search” the DVD Recorder detects whether an
✓ During “Automatic channel search” the DVD Recorder detects whether an
antenna or a cable TV signal is connected. If you have connected a cable TV signal
but found very few TV channels, you must search the channels manually.
but found very few TV channels, you must search the channels manually.
1 To do so, select “Cable/Antenna” instead of line “Auto Ch. Programming” in
step 6 and confirm with u.
2 If you select “Cable”, channels 1-125 will be available.
If you select “Anten.”, channels 2-69 will be available.
Select your type of connection by pressing u repeatedly:
“Anten.”, “Cable” or “Auto.” automatically detects which one you have.
Select your type of connection by pressing u repeatedly:
“Anten.”, “Cable” or “Auto.” automatically detects which one you have.
3 Confirm the setting with OK.
4 Press SYSTEM-MENU to go to the next menu. Press OK to start channel
search as prompted by the on-screen message. When the channel search is com-
plete, press SYSTEM-MENU repeatedly to remove all the menus.
plete, press SYSTEM-MENU repeatedly to remove all the menus.
Installation
Auto Ch. Programming
Searching for TV channels
000 Channels found
Please wait