Yamaha DRX-2 User Manual

User preferences

In this section you will learn how to set your user preferences on the DVD recorder. 
The symbols have the following meanings:

1

Switch on the TV set. If required, select the programme number for the DVD 
recorder.

2

Press SYSTEM-MENU on the remote control. The menu bar appears.

3

Select “

”  using  t or u and confirm with w.

4

Select the appropriate function with w or v and confirm with u.

5

Select the appropriate line using w or v and confirm with u.

6

Select the appropriate function using w or v or the setting with t or u.

7

Confirm the new setting by pressing ENTER/OK.

8

To close the menu item, press t.

You can choose the following features in this menu:

The picture signal from your DVD Recorder can be set to match your TV screen.
“4:3 letterbox”: for a “wide-screen” picture with black bars at the top and bottom
“4:3 panscan”: for a full-height picture with the sides trimmed.
“16:9” : for a wide-screen TV set (screen edge ratio 16:9)

Adapts the colour dynamics for NTSC playback

Use this feature to adjust the position of the picture on your TV left or right using t, u 
to suit your TV set.

Adjusts the brightness level for recording when connected with YPbPr.

This allows you to switch the Component Video signal between “Interlaced” and “Pro-
gressive Scan”.

Warning: If your TV has separate connections for “Interlaced” and “Progressive 
Scan” or it does not switch automatically between the two, it is possible that no pic-
ture will appear on the TV after it is switched from one to the other.

n

TV Shape

16:9

Black level shift

Off

Video shift

EXT1 video attenuation

Optimize video output

Interlaced

Picutre