Yamaha DRX-1 Owner's Manual
O
PERATION
13
English
Operation
Important notes for operation
You can switch on the DVD Recorder with the
STANDBY/ON button on the front of the Recorder or
POWER (B/I) button on the remote control to
interrupt a function. Keep your DVD Recorder connected
to the power outlet at all times to ensure programmed
recordings can be made.
STANDBY/ON button on the front of the Recorder or
POWER (B/I) button on the remote control to
interrupt a function. Keep your DVD Recorder connected
to the power outlet at all times to ensure programmed
recordings can be made.
Notes:
- Never turn the recorder on right after connecting the power
jack to a wall outlet, while the STANDBY indicator lights green.
Wait until the indicator turns red.
- When you switch off the DVD Recorder, the display will briefly
show ‘WAIT.’
- Never turn the recorder on right after connecting the power
jack to a wall outlet, while the STANDBY indicator lights green.
Wait until the indicator turns red.
- When you switch off the DVD Recorder, the display will briefly
show ‘WAIT.’
Loading discs
1 Press / on the front of the Recorder. The disc tray
opens.
2 Lay your chosen disc in the tray, label side up. If the
disc is two side, make sure the side you want to play is
facing up.
Make sure it is sitting properly in the correct recess.
facing up.
Make sure it is sitting properly in the correct recess.
3 Press / to close the tray.
➤ ‘READING’ appears on the Recorder display. If the
disc is pre-recorded or erase-protected, playback will
start automatically.
disc is pre-recorded or erase-protected, playback will
start automatically.
You can unload a disc by pressing / again or by pressing
and holding 9 for two seconds.
and holding 9 for two seconds.
Note:
If ‘Child Lock’ is ‘On’ and the disc inserted is not in the ‘child
safe’ list (not authorized), the PIN code must be entered and/or
the disc has to be authorized. (see ‘Access control’)
If ‘Child Lock’ is ‘On’ and the disc inserted is not in the ‘child
safe’ list (not authorized), the PIN code must be entered and/or
the disc has to be authorized. (see ‘Access control’)
Disc types
You will recognize the different types of discs that can be
used in your DVD Recorder by the logo. Depending on
the disc type you can either use it for recording and
playback or playback only. Some discs are not suitable to
be used in the DVD Recorder at all.
The following information summarizes existing disc types
and their DVD Recorder compatibility.
used in your DVD Recorder by the logo. Depending on
the disc type you can either use it for recording and
playback or playback only. Some discs are not suitable to
be used in the DVD Recorder at all.
The following information summarizes existing disc types
and their DVD Recorder compatibility.
Discs for recording and playing:
DVD+RW
Records and plays. In case of a new blank disc, after the
first recording, some more time (up to two minutes) is
needed by the Recorder to automatically make the disc
compatible with DVD video players.
Records and plays. In case of a new blank disc, after the
first recording, some more time (up to two minutes) is
needed by the Recorder to automatically make the disc
compatible with DVD video players.
DVD+R
Records and plays.
Records and plays.
Discs for playing only:
DVD-Video
DVD-R (DVD-Recordable)
These play only if they contain DVD-Video.
These play only if they contain DVD-Video.
DVD-RW
Plays only if it is recorded in Video mode and has been
finalized.
Plays only if it is recorded in Video mode and has been
finalized.
4 9