Yamaha PJP-50R User Manual

If this unit is used in an environment with a SIP server, the 
address of the SIP server to be referenced by this unit and 
the SIP address of this unit should be registered. If 
password authentication is required for accessing the 
desired SIP server, it is also necessary to enter the 
password. Consult your system administrator for details.

The settings described in this section are not required if this unit 
is used in an environment without a SIP server.

In the Web menu, click “SIP Server”.
The “SIP Server” window appears.

In the “SIP Address”, enter the SIP address 
to be set to this unit.
Enter the SIP address in the format
“sip:(sip address)”.

Example: sip:sipuser@yamaha.co.jp

Click “Submit”.
The setting is registered and the top window of the 
Web menu reappears.

• To connect a call using the SIP server, the SIP address 

of this unit should be registered in the SIP server.

• It is not possible to establish a connection between a 

ProjectPhone system that uses the SIP address and a 
ProjectPhone system that uses the IP address.

• A global IP address should be assigned to the WAN on 

the router side.

MIC MUTE

VOL

MIC MUTE

VOL

MIC MUTE

VOL