Manualsbrain.com
  1. Manuals
  2. Brands
  3. Yamaha
  4. PJP-100H
  5. Owner's Manual

Yamaha PJP-100H Owner's Manual

Download
Page of 59
30
Setting Menu List
Using the keys on this unit
In the initial display, select “Menu” 
→ “Settings” 
→“Sound Settings” → “Speaker Mode”.
y
You can display “Speaker Mode” menu by pressing 
 
continuously in the initial display or calling display.
Using the web menu
In the web menu, select “Speaker Mode”.
■ Configuring the room size 
 
You can configure this setting depending on the room size 
and operating environment. However, you do not need to 
change it from “Large” (default setting) normally.
• Large (default): Position for using the unit in an 
ordinary conference room, open space or office. The 
communication quality is most stable in this position. 
This setting is indicated by 
 on the display.
• Medium: Select this position when echo is heard on 
the other party of communication with the default 
“Large” position. This position is selected when the 
unit is used in a room with large reverberations. This 
setting is indicated by 
 on the display.
• Small: Select this position when echo is still heard on 
the other party of communication with the “Medium” 
position. This setting is indicated by 
 on the display.
• Room Size is the function for reducing echo on the other party 
of communication. Room Size cannot reduce the echo that is 
heard from the unit installed on the local location.
• Positions “Medium” and “Small” can improve the echo 
processing capability but lowers the communication quality. 
These positions should be selected only when echo is heard on 
the other party.
Using the keys on this unit
In the initial display or the display during communication, 
select “Menu” 
→ “Settings” → “Sound Settings” → 
“Room Size”.
Using the web menu
In the web menu, select “Room Size”.
■ Configuring the external input/output 
setting 
 
You need to configure this setting when you connect an 
external audio equipment to this unit. The default setting 
is “None”.
• None: Usually select this setting.
• Audio: Select this setting when connecting external 
audio equipment to this unit.
Using the keys on this unit
In the initial display, select “Menu” 
→ “Settings” 
→“Sound Settings” → “External I/O”.
Using the web menu
In the web menu, select “External Input/Output”.
Configuring the audio connection function
When the PJP-100H is connected with a PC through 
Ethernet, another PJP-100H unit can be connected to the 
existing PJP-100H using commercially available audio 
cables (stereo mini-jack cables). This makes the system 
applicable to conferences in a larger space or with a larger 
number of participants.
1
Connect the master PJP-100H to the network.
2
Using a commercially available stereo mini-
pin cable, connect the AUDIO IN jack of the 
second PJP-100H (slave unit) to the AUDIO 
OUT jack of the PJP-100H connected to the 
network (master unit).
3
Using another commercially available stereo 
mini pin cable, connect the AUDIO OUT jack 
of the second PJP-100H (slave unit) to the 
AUDIO IN jack of the first PJP-100H (master 
unit).
4
Change the “External I/O” settings of both 
the master and slave units as follows.
• Master PJP-100H: Set to “Connection:(mstr)”.
• Slave PJP-100H: Set to “Connection:(slv)”.
Notes
1
2
3
4
5
6
7
8
9
0
MIC MUTE
LAN
VOL
DC IN
 12V
IN  AUDIO OU
T
1
2
3
4
5
6
7
8
9
0
MIC MUTE
LAN
VOL
DC
 IN
 12V
IN  AUDIO OU
T
AUDIO OUT
AUDIO IN
LAN
AUDIO IN
AUDIO OUT
1
2
3
4
5
6
7
8
9
0
MUTE
LAN
VOL
DC IN 
12V
IN  AUDIO O
UT
1
2
3
4
5
6
7
8
9
0
MUTE
LAN
VOL
DC IN 
12V
IN  AUDIO O
UT
PJP-100H (Slave unit)
Internet, 
corporate LAN, 
etc.
PJP-100H (Master unit)
01EN_00_PJP-100H_UCGB.book  Page 30  Wednesday, August 23, 2006  3:04 PM