Yamaha PJP-100H Owner's Manual

Follow the procedure below to install the latest firmware 
automatically.

• Automatic firmware update can be performed only if this unit 

can be connected to the internet. If not, follow the procedure in 
“Updating the firmware manually” (page 44).

• Once the firmware update is started, do not perform any other 

operation until update is completed and this unit is restarted. If 
the update operation is interrupted, this unit may become 
unusable, in which case this unit needs to be returned to the 
factory to repair.

• When the firmware update is completed, this unit is restarted 

automatically. All of the calls being connected are disconnected 
at this time.

• Do not unplug the LAN cable during the firmware update. 

Otherwise, this unit could become unusable and may need to be 
returned to the factory to repair.

y
You can specify any URL to download the firmware (page 44).

The menu display appears.

The “Settings” menu appears.

Press .
The “Firmware Update” menu appears.

press .
This unit is connected to the internet and downloads 
the latest firmware. When downloading is completed, 
the firmware update is automatically started.

MIC MUTE (red LED) on the top panel of this unit 
flashes during the firmware update process. Do not turn 
this unit off while MIC MUTE (red LED) flashes.

■ When the firmware update is complete

This unit restarts automatically.
Check the version number in the “Program Version” field 
on the top of the web menu to confirm that the new 
firmware is installed properly.

MIC MUTE

LAN

VOL

DC IN 12V

IN  AUDIO OUT

3. General Settings

2. Sound Settings

1. Network Settings

Settings

5. Firmware Update

4. Restore Settings

3. General Settings

Settings

2. No

1. Yes

ver. DT1.12-V1.6x

Firmware Update

01EN_00_PJP-100H_UCGB.book  Page 43  Wednesday, August 23, 2006  3:04 PM