Yamaha SPX2000 Owner's Manual
16
SPX2000—Owner’s Manual
Press the [COMPARE] button (I) to compare the origi-
nal effect with the edited version.
nal effect with the edited version.
→ Each time you press this button, the [COMPARE] LED
will alternate between lit and blinking. The LED will
light if the edited effect is selected, and will blink if the
unedited effect is selected.
light if the edited effect is selected, and will blink if the
unedited effect is selected.
Here’s how to specify a location in the USER bank and
store the edited effect.
store the edited effect.
1
Select the USER bank
Press the [BANK] button (A) several times to select
the USER bank.
Press the [BANK] button (A) several times to select
the USER bank.
→ The [BANK] indicator (A) will indicate “USER.”
2
Select a store-destination for the effect
Use the [
Use the [
▲]/[▼] buttons (C) to specify the effect
number in which you will store the effect you edited.
→ The effect number indicator (0) shows the cur-
rently selected effect number.
3
Store the effect
Press the [STORE] button (B) to store the effect.
Press the [STORE] button (B) to store the effect.
→ The [COMPARE] LED (I) will go dark, and the
[UNDO] LED (E) will light.
You can return settings to their prior state by “undoing”
the previous Store, Recall, or Clear Effect operation. You
can also “undo” the previous “undo” operation; this is
called “redo.”
the previous Store, Recall, or Clear Effect operation. You
can also “undo” the previous “undo” operation; this is
called “redo.”
Undo
When the [UNDO] LED (E) is lit, press the [UNDO] but-
ton to undo the previous Store, Recall, or Clear Effect
operation.
When the [UNDO] LED (E) is lit, press the [UNDO] but-
ton to undo the previous Store, Recall, or Clear Effect
operation.
→ The [UNDO] LED will blink.
Redo
When the [UNDO] LED (E) is blinking, press the
[UNDO] button to cancel the previous Undo operation.
Redo
When the [UNDO] LED (E) is blinking, press the
[UNDO] button to cancel the previous Undo operation.
→ The [UNDO] LED will light.
Check the edited effect
NOTE: The following buttons are inoperable while the [COMPARE]
LED is blinking.
• [
LED is blinking.
• [
▲ INC]/[▼ DEC] buttons (
G
)
• [UTILITY] buttons (
L
)
• [TAP] button (
N
)
Store the effect
Undoing the previous operation
NOTE: Undo/Redo will no longer be available if you switch
parameters.
parameters.