Yamaha SPX2000 Owner's Manual

SPX2000—Owner’s Manual

Operation

You can transmit the SPX2000’s system settings, MIDI
program change tables, and effect data to another device.
This data will be transmitted from the port specified by the
“MIDI PORT GENERAL” setting (page 21).

Select the “BULK OUT (ALL)” function
Press the [UTILITY] button (L) several times to select
“BULK OUT (ALL).”

Start transmission
Press the [

▲ INC] button (G) to start transmission.

While the data is being transmitted, the display will
indicate “Transmitting...”

When transmission is completed, the display will indi-
cate “Completed!” for approximately one second.

Select the “TEMPO SOURCE” function
Press the [UTILITY] button (L) several times to select
“TEMPO SOURCE.”

Select the tempo synchronization source
Use the [

▲ INC]/[▼ DEC] buttons (G) to select the

tempo synchronization source.

You can select one of the following three sources for
tempo synchronization.

• TEMPO VALUE ONLY:

The TEMPO value specified using the [

▲ INC]/[▼

DEC] buttons

• MIDI CLOCK:

MIDI Clock messages from the device connected to
the [MIDI IN] connector (T) or [TO HOST USB]
connector (U)

• TAP:

The TEMPO value specified using the [TAP] button
(N), [FOOT SW] jack (O), or [

▲ INC]/[▼ DEC]

buttons

You can individually enable/disable reception for some
types of MIDI message. Reception can be enabled/disabled
for the following MIDI messages.

• NOTE ON/OFF (Note on/off)

• PGM CHANGE (Program change)

• CTL CHANGE (Control change)

• SYSEX BLKDMP (Bulk dump)

• SYSEX PRMCHG (Parameter change)

Select the “MIDI RECEIVE” function
Press the [UTILITY] button (L) several times to select
“MIDI RECEIVE.”

Select a type of MIDI message
Use the [BACK] button (F)/[NEXT] button (H) to
select the type of MIDI message for which you want to
enable/disable reception.

Enable or disable MIDI message reception
Press the [

▲ INC] button (G) to select ON (enable),

or press the [

▼ DEC] button (G) to select OFF (dis-

able).

Transmitting SPX2000 data to
another device

NOTE: The INPUT MODE and METER settings are not
included with the transmitted data.

Selecting the tempo synchroni-
zation source

BULK OUT(ALL)
PUSH INC

TEMPO SOURCE
TAP

Enabling/disabling MIDI mes-
sage reception

MIDI RECEIVE
NOTE ON/OFF= ON