ZyXEL Communications Plumbing Product metrogigabit switch User Manual
![ZyXEL](https://files.manualsbrain.com/attachments/3214a2e9b754be0b3a733d7fd22528bce8dfdece/common/fit/150/50/aafad0ddc2d0e29fd47cd3dd2d9b75f1e404d4f49531d3941fba34789d6b/brand_logo.jpeg)
Chapter 24 Multicast
MGS3700-12C User’s Guide
251
24.8 MVR Group Configuration
All source ports and receiver ports belonging to a multicast group can receive
multicast data sent to this multicast group.
multicast data sent to this multicast group.
Configure MVR IP multicast group address(es) in the Group Configuration
screen. Click Group Configuration in the MVR screen.
screen. Click Group Configuration in the MVR screen.
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all
ports. Use this row first to set the common settings and then make
adjustments on a port-by-port basis.
ports. Use this row first to set the common settings and then make
adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Source Port
Select this option to set this port as the MVR source port that sends and
receives multicast traffic. All source ports must belong to a single
multicast VLAN.
receives multicast traffic. All source ports must belong to a single
multicast VLAN.
Receiver Port
Select this option to set this port as a receiver port that only receives
multicast traffic.
multicast traffic.
None
Select this option to set the port not to participate in MVR. No MVR
multicast traffic is sent or received on this port.
multicast traffic is sent or received on this port.
Tagging
Select this checkbox if you want the port to tag the VLAN ID in all
outgoing frames transmitted.
outgoing frames transmitted.
Add
Click Add to save your changes to the Switch’s run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
VLAN
This field displays the multicast VLAN ID.
Active
This field displays whether the multicast group is enabled or not.
Name
This field displays the descriptive name for this setting.
Mode
This field displays the MVR mode.
Source Port
This field displays the source port number(s).
Receiver Port
This field displays the receiver port number(s).
802.1p
This field displays the priority level.
Delete
To delete a multicast VLAN(s), select the rule(s) that you want to
remove in the Delete column, then click the Delete button.
remove in the Delete column, then click the Delete button.
Cancel
Click Cancel to clear the Delete check boxes.
Table 70 Advanced Application > Multicast > Multicast Setting > MVR (continued)
LABEL
DESCRIPTION