ZyXEL Communications Plumbing Product metrogigabit switch User Manual
Chapter 3 Hardware Overview
MGS3700-12C User’s Guide
44
3.4 Configuring the Switch
You may use the embedded web configurator or command line interface to
configure the Switch. If you’re using the web configurator, you need Internet
Explorer 5.5 and later or Netscape Navigator 6 and later.
configure the Switch. If you’re using the web configurator, you need Internet
Explorer 5.5 and later or Netscape Navigator 6 and later.
PWR
Green
On
The system is turned on.
Off
The system is off.
SYS
Green
On
The system is on and functioning properly.
Blinking The system is rebooting and performing self-diagnostic
tests.
Off
The power is off or the system is not ready/malfunctioning.
ALM
Red
On
A hardware failure is detected or an alarm from the
external alarm is received.
external alarm is received.
Off
The system is functioning normally.
LNK/ACT
The up arrow icon ( ) on each SFP slot indicates the LED status for the slot while the
down arrow icon ( ) indicates the LED status for the corresponding Ethernet port.
down arrow icon ( ) indicates the LED status for the corresponding Ethernet port.
Green
Blinking The system is transmitting/receiving to/from an Ethernet
network.
On
The link to a 1000 Mbps Ethernet network is up.
Amber
Blinking The system is transmitting/receiving to/from an Ethernet
network.
On
The link to a 100 Mbps Ethernet network is up.
Off
The link to an Ethernet network is down.
MGMT
10
Green
Blinking The system is transmitting/receiving to/from an Ethernet
device.
On
The port is connected at 10Mbps.
Off
The port is not connected at 10Mbps or to an Ethernet
device.
device.
100
Amber
Blinking The system is transmitting/receiving to/from an Ethernet
device.
On
The port is connected at 100Mbps.
Off
The port is not connected at 100Mbps or to an Ethernet
device.
device.
Table 2 LED Descriptions (continued)
LED
COLOR
STATU
S
S
DESCRIPTION