ZyXEL Communications Plumbing Product metrogigabit switch User Manual
Chapter 4 The Web Configurator
MGS3700-12C User’s Guide
52
4.3.1 Change Your Password
After you log in for the first time, it is recommended you change the default
administrator password. Click Management > Access Control > Logins to
display the next screen.
administrator password. Click Management > Access Control > Logins to
display the next screen.
Figure 19 Change Administrator Login Password
4.4 Saving Your Configuration
When you are done modifying the settings in a screen, click Apply to save your
changes back to the run-time memory. Settings in the run-time memory are lost
when the Switch’s power is turned off.
changes back to the run-time memory. Settings in the run-time memory are lost
when the Switch’s power is turned off.
Diagnostic
This link takes you to a screen where you can view system logs and test
port(s).
port(s).
Syslog
This link takes you to screens where you can setup system logs and a
system log server.
system log server.
Cluster
Management
Management
This link takes you to screens where you can configure clustering
management and view its status.
management and view its status.
MAC Table
This link takes you to a screen where you can view the MAC addresses
(and types) of devices attached to what ports and VLAN IDs.
(and types) of devices attached to what ports and VLAN IDs.
ARP Table
This link takes you to a screen where you can view the MAC addresses –
IP address resolution table.
IP address resolution table.
Configure
Clone
Clone
This link takes you to a screen where you can copy attributes of one port
to other ports.
to other ports.
Table 4 Navigation Panel Links (continued)
LINK
DESCRIPTION