ZyXEL Communications Plumbing Product metrogigabit switch User Manual
Chapter 6 Tutorials
MGS3700-12C User’s Guide
78
6.4 How to Use Error Disable and Recovery on
the Switch
the Switch
This tutorial shows you how to shut down a port when:
• there is a loop occurred
or
• too many ARP requests (over 100 packets per second) received on a port
You also want the Switch to wait for a period (10 minutes) before resuming the
port automatically, after the problem(s) are gone. Loop guard and Errdiable
features are helpful for this demand.
port automatically, after the problem(s) are gone. Loop guard and Errdiable
features are helpful for this demand.
Note: Refer to
for more
information about Loop Guard and Errdiable.
To configure the settings:
1
First, click Advanced Application > Loop Guard. Select the Active option in
the first section to enable loop guard on the Switch. Then select the Active option
of the first entry (port *) to enable loop guard for all ports. Click Apply.
the first section to enable loop guard on the Switch. Then select the Active option
of the first entry (port *) to enable loop guard for all ports. Click Apply.