ZyXEL Communications Plumbing Product metrogigabit switch User Manual
Chapter 7 System Status and Port Statistics
MGS3700-12C User’s Guide
94
7.2 Port Status Summary
To view the port statistics, click Status in all web configurator screens to display
the Status screen as shown next.
the Status screen as shown next.
Figure 39 Status
The following table describes the labels in this screen.
Table 7 Status
LABEL
DESCRIPTION
Port
This identifies the Ethernet port. Click a port number to display the Port
Details screen (refer to
Details screen (refer to
).
Name
This is the name you assigned to this port in the Basic Setting > Port
Setup screen.
Setup screen.
Link
This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps
or 1000M for 1000Mbps) and the duplex (F for full duplex or H for half).
It also shows the cable type (Copper or Fiber) for the combo ports.
or 1000M for 1000Mbps) and the duplex (F for full duplex or H for half).
It also shows the cable type (Copper or Fiber) for the combo ports.
State
If STP (Spanning Tree Protocol) is enabled, this field displays the STP
state of the port (see
state of the port (see
for more information).
If STP is disabled, this field displays FORWARDING if the link is up,
otherwise, it displays STOP.
otherwise, it displays STOP.
LACP
This fields displays whether LACP (Link Aggregation Control Protocol) has
been enabled on the port.
been enabled on the port.
TxPkts
This field shows the number of transmitted frames on this port.
RxPkts
This field shows the number of received frames on this port.
Errors
This field shows the number of received errors on this port.
Tx KB/s
This field shows the number of kilobytes per second transmitted on this
port.
port.
Rx KB/s
This field shows the number of kilobytes per second received on this port.