ZyXEL Communications Food Warmer vantage access User Manual

 Chapter 14 LAN Device

Vantage Access User’s Guide

The LANEthernetInterfaceConfig screen allows you to view LAN Ethernet settings. Refer 
to 

Select a registered device in the Device List window and click InternetGatewayDevice > 
LANDevice. Then click a number and LANEthernetInterfaceConfig to display the screen. 

Figure 84   TR-069: LAN Device: LANEthernetInterfaceConfig 

1 Select a registered device in the Device List window and click Configuration > 

InternetGatewayDevice > LANDevice. 

2 Click a number and LANEthernetInterfaceConfig. 
3 Click a number to display the configuration screen for a LAN Ethernet interface. 

Use this screen to enable or disable the LAN Ethernet interface, configure the port speed and 
duplex mode. You can also use this screen to enable or disable static MAC address learning.

Figure 85   TR-069: LAN Device: LANEthernetInterfaceConfig: Details 

IPInterfaceSubnetMas
k

This field displays the subnet mask on the LAN. For example, 255.255.255.0. 

IPInterfaceAddressing
Type

This field displays the method to assign IP address on the LAN interface. 
DHCP means the device is set to assign IP addresses from a DHCP server. 
Static means the device is set to use a fixed IP address configured in the field 
above. 
AutoIP means the device is set to use the default IP settings on the LAN 
interface. 

Table 38   TR-069: LAN Device: IPInterface: Details  (continued)