ZyXEL Communications Food Warmer vantage access User Manual

Chapter 18 WAN Device

Vantage Access User’s Guide

Use the PortMapping screen to view the port mapping instance for the WAN PPP connection. 
Refer to 

 for other field descriptions.

1 Select a registered device in the Device List window and click Data Model > 

InternetGatewayDevice > WANDevice. 

2 Click a number and WANConnectionDevice. 
3 Click a number and WANPPPConnection. 
4 Click a number and PortMapping to display the screen as shown. 

Figure 212   TR-098: WAN Device: WANPPPConnection: PortMapping   

Use the detailed PortMapping screen to configure the port mapping settings for the WAN 
PPP connection.

1 Select a registered device in the Device List window and click Data Model > 

InternetGatewayDevice > WANDevice. 

2 Click a number and WANConnectionDevice. 
3 Click a number and WANPPPConnection. 
4 Click a number and PortMapping. 
5 Click a number to display the screen as shown. 

RouteProtocolRx

This field displays the routing protocol (RIP1, RIP2 or OSPF) the link is to 
use. 
Off disables the routing feature. 

PPPLCPEcho

This field displays the time (in seconds) for PPP Link Control Protocol 
(LCP) echo.

PPPLCPEchoRetry

This field displays the time (in seconds) for PPP Link Control Protocol 
(LCP) echo retry. 

ShapingRate

This field displays the rate (in bits per second) the device shapes the 
outgoing traffic to.

ShapingBurstSize

This field displays the burst size (in bytes) for traffic shaping.

PortMappingNumberOfE
ntries

This field displays the number of port mappings on this link.

Table 112   TR-098: WAN Device: WANPPPConnection: Details (continued)