ZyXEL Communications Food Warmer vantage access User Manual

Chapter 20 LAN Device

Vantage Access User’s Guide

BasicDataTransmit
Rates

This field displays the wireless transmission rate (Mbps) for broadcast, multicast 
and unicast frames on the device. 
Multiple transmission rates are separated by commas (,). For example, “1,2” 
means the device is able to send at 1 Mbps or 2 Mbps. 

OperationalDataTr
ansmitRates

This field displays the maximum transmission rate (in Mbps) allowed for unicast 
frames on the device. 
Multiple transmission rates are separated by commas (,). For example, if the 
BasicDataTransmitRates field is “1,2” and this field is “1,2,5.5,11”, then the 
device can transmit unicast frames at the maximum rates of 5.5 Mbps or 11 
Mbps. 

PossibleDataTrans
mitRates

This field displays the transmission rates for unicast frames WLAN clients are 
allowed when connected to the device. 
For example, if this field displays “1,2,5.5”. This means that the device allows a 
wireless connection of up to 5.5 Mbps even though it is capable of connecting at 
11 Mbps. 

InsecureOOBAcce
ssEnabled

This field displays 1 to indicate that configuration changes are allowed to send 
through insecure management methods other than the WAN CPE Management 
Protocol. 
0 disables this feature.  

BeaconAdvertisem
entEnabled

This field displays 1 to indicate that the device is set to send beacons to advertise 
its presence; otherwise, this field is 0. 

RadioEnabled

This field display 1 to indicate that the wireless transmission is allowed on the 
device; otherwise, this field displays 0. 

AutoRateFallBack
Enabled

This field displays 1 to indicate that the device is set to automatically reduce 
wireless transmission rates due to noise or contention. 
0 deactivates this feature. 

LocationDescriptio
n

This field displays the location of the device for identification purposes. 

RegulatoryDomain

This field displays the name of the regulatory body in your geographical area. 
The first two characters are the country code as defined in ISO/IEC 3166-1. For 
the third character, “ “ means all environment, “I” means inside and “O” means 
outside. 

TotalPSKFailures

This field is applicable for WPA and 802.11i authentication methods. 
This field displays the number of times pre-shared key authentication has failed.  

TotalIntegrityFailur
es

This field is applicable for WPA and 802.11i authentication methods. 
This field displays the number of times MICHEAL integrity check has failed. 

ChannelsInUse

This field displays the channel number(s) that is currently used on the device for 
wireless transmission. 

DeviceOperationM
ode

This field displays the wireless operation mode for the device. 

DistanceFromRoot

This field displays the number of hops between this device and the wireless 
bridge/repeater.  

PeerBSSID

This field displays the MAC address of the peer wireless bridge/repeater. 

AuthenticationServ
iceMode

If user authentication is enabled, this field displays the location of the user 
database the device is to check. 

TotalBytesSent

This field displays the number of transmitted bytes on this interface.

TotalBytesReceive
d

This field displays the number of received bytes on this interface.

Table 144   TR-098 Amendment 1: LAN Device: WLANConfiguration (continued)