ZyXEL Communications Food Warmer vantage access User Manual

Chapter 21 WAN Device

Vantage Access User’s Guide

Figure 290   TR-098 Amendment 1: WAN Device: WANPOTSLinkConfig   

The following table describes the labels in this screen. Refer to 

 for 

other field descriptions.

Table 159   TR-098 Amendment 1: WAN Device: WANPOTSLinkConfig  

Enable

This field displays 1 to indicate that the POTS link is active; otherwise it 
displays 0. 

LinkStatus

This field displays the link status (Up, Down, Dialing, Connecting or 
Unavailable). 

ISPPhoneNumber

This field displays the phone number (up to 64 digits in countrycode-
areacode-phone number format) to dial to connect to the ISP. For example, 
+86-10-62618501. 
Multiple phone numbers are separated with a colon (:). 

ISPInfo

This field displays a descriptive name (up to 64 characters) to identify this 
ISP. 

LinkType

The default link type is PPP_Dialup. 

NumberOfRetries

This field displays the number of times (between 0 and 4294967295) the 
CPE device is to re-dial for Internet connection. 

DelayBetweenRetries

This field displays the time (in milliseconds) the CPE device is to wait 
before attempting to connect to the ISP again. 

Fclass

This field indicates the transmission functions the CPE device is capable of.
0:data
1, 2, 2.0: fax
8: voice
80: DSVD

DataModulationSupporte
d

This field displays the modulation method(s) supported for data transfer. 

DataProtocol

This field displays the protocol(s) supported for data transfer. 

DataCompression

This field displays the compression method used for data transfer. 

PlusVTRCommandSupp
orted

This field indicates whether full-duplex mode is activated on the link or not.