Zoom B3 User Manual
26
Using the Looper
Using the Looper
• Turn of the middle unit.
• Turn on the left unit.
1
To activate the Looper
2
To set the recording time
• Press for 1 second.
NOTE
• The looper can record 1.5–40 seconds (20 seconds when UNDO is enabled).
• If the setting (number of quarter notes) would not fall in this range,
• If the setting (number of quarter notes) would not fall in this range,
it will automatically be adjusted.
• Changing the TIME setting will erase the currently recorded loop.
NOTE
• The setting range is 40-250.
• Changing the tempo will erase the currently recorded loop.
• This tempo setting is used by every effect, rhythms and the looper.
• Changing the tempo will erase the currently recorded loop.
• This tempo setting is used by every effect, rhythms and the looper.
3
To adjust the tempo
• You can also set the tempo using .
• If no loop has been recorded yet, you can also set the tempo by
• If no loop has been recorded yet, you can also set the tempo by
tapping .
HINT
Manual
Use the footswitch to start and stop recording.
Note mark
Set the recording time by setting the tempo and the number of
quarter notes.
quarter notes.